XTM-106系列壓鑄品油壓切邊機
 鋁制品切邊機，鋁制品切邊機適用范圍：（壓鑄品切邊機，液壓機，油壓機，壓鑄品沖邊機，液壓切邊機，切邊機，鋁制品沖邊機，鋁鎂制品切邊機）
 鋁制品切邊機，鋁制品切邊機本系列液壓機廣泛用于各類鋁、鎂合金壓鑄制品的毛邊沖切及整形，塑料制品的整切；也適用于塑性材料的成形如板料的落料、拉伸等、本機在壓鑄行業應用,是專為壓鑄行業而設計.
 產品特點：
1.該系列液壓機床以1-14MPA的液體壓力為動力源,外接三相AC380V 50HZ或三相
AC220 60HZ交流電源.總耗電功率不超過3.7KW.
2.該系列設備以液體作為介質來傳遞能量,效率高,沖切速度快,噪音小,
3.設備待機時噪音不超過80分貝.
4.采用四柱三板式結構,活動板的垂直精度由四個精密導套控制,下工作面與上工作面任意點的平行精度達到0.1MM以下.
5.沖床具有廢料吹氣裝配.并在下工作臺*開有廢料落料槽.
6.沖床的沖切下止點位置一般通過壓力開關,位置感應器進行控制.
7.如客戶的需要也可設計出快慢兩段速度(一般快靠近產品時減速下壓)
8.具有自動計數功能,分手動和半自動兩種控制方式,手動可將壓裝上模停在任意行程范圍內,配有緊急回升按鈕,也可加裝紅外線護手裝置
9.壓力、行程、沖切速度、吹氣時間、閉合高度客戶均可自行調整,方便操作；
10.液壓系統內置油箱底部,外觀整潔,穩重. 工作臺下方裝有腳輪和腳杯，可輕便移動.
11.該系列液壓機械出力范圍有3tf. 5tf.  10tf.  10tf  15tf.可選.(1tf=1000kgf=9.8KN)                                                                出力                 3T           5T         10T
工作面尺寸mm      400*300      500*400    500*400
zui大工作高度mm    400          400         400
油缸行程mm        200          200         200
油缸下降速度mm/s   75           50          65
上升速度mm/s       100          65          85
Features:
1.Adopts four-column and three-plate structure, the active placte paralleling with the working surface in highprecision, four precise guide sleeves leading to highly precise down-pressing plumb;
2.Safe design, double hands operation, with emergency buttons (the photoelectric protective device should beadditionally mounted) and micro-inching adjusting buttons;
3.On the working platform is set with the charging conduit and blowing device to promoteproductivity;
4.The pressure, stroke, speed, dwell time and shut height can be adjusted according to request, allowing forconvenient operation;
5.Under the working platform is installed with the caster and foot cup, allowing the press to move conveniently andbe operated in a laborsaving and high-efficient way.
Scope of Application:
Die cutting and shaping of burrs of various Amasilium alloy die casting products, whole cutting of plastic products;forming of plastic materials, like blanking, stretching and embossing of plates, as well as pressing of plastic and powder products; and other uses; It is mostly used in auto and motorcycle fittingsectors.

溫馨提示： 以上是關于鑫臺銘 安全方便的詳細介紹， 產品由深圳鑫臺銘機械設備有限公司為您提供，如果您對深圳鑫臺銘機械設備有限公司產品信息感興趣可以 供應商 或者讓供應商主動您 ，您也可以查看更多與鑫臺銘 安全方便相關的產品！