應用
鉆, 銑, 磨, 拋光機床 | Applications | Drilling, Milling, Grinding, Dressing | |
外殼夾裝尺寸 | 33 mm | Clamping diameter | 33 mm |
馬達類型 | 3相異步高速電機 | Motor system | 3 Phase asynchronous motor |
轉速范圍 | 5,000 – 60,000 min-1 | Speed range | 5,000 - 60,000 rpm |
額定電壓 | 30 V | Voltage | 30 V |
電流 | zui大8 A | Current | max. 8 A |
扭矩 | zui大 4.5 Ncm | Torque | max. 4.5 Ncm |
頻率 | 83 – 1,000 Hz | Frequency | 83 - 1,000 Hz |
功率 | zui大 250 W | Output power | max. 250 W |
重量 | 0.8 kg | Weight | 0.8 kg |
軸承 | 2x陶瓷軸承, 1x 鋼球軸承, 油脂潤滑 | Bearing system | 2x Hybrid, 1x Steel, lifetime lubricat. |
防護等級 | IP 54 | Protection category | IP 54 |
電機保護 | - | Motor protection | - |
安裝位置 |
| Working position |
|
負載方向 | 軸向 + 徑向 | Load direction | axial + radial |
錐面跳動 | 通常 1 µm | Run-out (taper) | typ. 1 µm |
夾持范圍 | Ø 0.5 – 4.0 mm (包括 1/8") | Chuck clamping range | Ø 0.5 - 4.0 mm (incl. 1/8") |
換刀方式 | 2 扳手 (SW 12) | Tool change | 2 open-end wrenches (12 mm) |
冷卻系統 | 外夾具冷卻 | Cooling system | Cooling via clamping bracket |
防水防塵措施 | 壓縮氣 0.5 – 0.8 bar (內管徑 Ø4 mm) | Protected against dirt | Sealing air 0.5 - 0.8 bar |
外殼材料 | 不銹鋼 | Housing material | Stainless steel |
固定電纜長度 | 1.5 m | Connecting cable | 1.5 m |
*變頻器 | e@syDrive® 4424*, 4425 | Inverter recommendation | e@syDrive® 4424*, 4425 |
*輸出功率有所降低 | 保留修改權 | *reduced output power | Subject to change without notice |
