特色 Features
堅固的結構適用于嚴苛的工況環境
Heavy Duty construction
能承受強負荷，大直徑閥桿，防止彎曲或者斷裂
Heavy-duty, large diameter shaft to eliminate flexing and breakage.
PTFE增強閥座，消除磨損，減少摩擦，提高了閥門的使用壽命
PTFE seats energized with O-rings eliminate wear and improve cycle life.
精密加工的球和閥座確保低扭矩?zé)o泄漏
Fully concentric and mirror polished ball assures smooth, leak-proof operation.
流體路徑暢通，減少了壓降
Smooth flow path eliminates pressure loss.
由令方便拆卸及維修
True-union ends for ease of piping installation and removal
連接方式：承插式 螺紋式 法蘭式 對焊式
Connect Way: Socket Weld /Threaded/ flange /Butt weld
材質：UPVC CPVC PP PVDF
Body Material :UPVC CPVC PP PVDF
密封材質：EPDM或者FKM
Seal Material: EPDM or FKM(Viton)
尺寸：1/2”-4”（DN15-DN100）
Size:1/2”-4”（DN15-DN100）
出廠前逐個99%檢測
Every valve are individually tested prior to shipment.
標準特征 STANDARD FEATURES
具有堅固的防水和防腐的ABS外殼。
Rugged weatherproof and anti-corrosive ABS housing
多電壓驅動（DC12V/24V,AC24V/110V/230V,AC/DC24V,AC95-265V），帶自動電壓感應
Multi-voltage （DC12V/24V,AC24V/110V/230V,AC/DC24V,AC95-265V）with auto-voltage sensing.
內置電機過載保護器
Thermally protected motor
容易轉動的手動輪便于手動操作
Easy-to-turn hａnd wheel for manual override
67防護等級
IP67 ingress protection
開關壽命可以達20000次
20,000+ cycle design.
基本開關型 BASIC ON-OFF
大的圓形可視位置指示器
Large, dome style visual position indicator
可選Fail-Safe （斷電復位）(AC/DC95V-265V,AC/DC24V)
Fail-safe options(AC/DC95V-265V,AC/DC24V)
可選防冷凝加熱器
Thermostatic anti-condensation heater options
可選高速運行型（DC24V 1-2s,AC220V 5-7s）
HI‐SPEED（DC24V 1-2s,AC220V 5-7s）options
型號：
管徑 | 電動PVC球閥 | 電動PVC三通球閥 |
1/2" | EABV050ET-PV | TEABV050ET-PV |
3/4" | EABV075ET-PV | TEABV075ET-PV |
1" | EABV100ET-PV | TEABV100ET-PV |
1-1/4" | EABV125ET-PV | TEABV125ET-PV |
1-1/2" | EABV150ET-PV | TEABV150ET-PV |
2" | EABV200ET-PV | TEABV200ET-PV |
2-1/2" | EABV250ET-PV | NA |
3" | EABV300ET-PV | NA |
4" | EABV400ET-PV | NA |
5" | NA | NA |
6" | NA | NA |
8" | NA | NA |
1、上述球閥型號為EPDM密封,由令螺紋連接，如需插接，將型號中的T改為S，如果密封為FKM ，型號中的E改為V；三通球閥有T型和L型，在型號后面+T或L；如TEABV050ET-PV-L 1、The above-mentioned ball valve is EPDM seal, which is connected by threads or union. If inserting is needed, the T in the model is changed to S, and if the seal is FKM. The E in the model is changed to V; the three way ball valve has T and L type, adding T or L at the rear of the model; TEABV050ET-PV-L. 2、上述閥門價格為AC24/110V/220V基本開關型電動執行器，要選Fail-Safe （斷電復位）(AC/DC95V-265V,AC/DC24V)、防冷凝加熱、高速型，分別在后面加01、02、03、04，如TEABV050ET-PV-L-04；要選智能開關型和智能調節性在型號后面分別加SO或者SR，并分別在其后面要選Fail-Safe （斷電復位）(AC/DC95V-265V,AC/DC24V)、防冷凝加熱、高速型、液位專用型分別在后面加01、02、03、04、05，如EABV050ET-PV-SO-05 2, The above-mentioned valve price is AC24/110V/220V basic switch type electric actuator, to choose Fail-Safe (power-off reset) (AC/DC95V-265V, AC/DC24V), anti-condensation heating, high-speed type, respectively, adding 01, 02, 03, 04 behind, such as TEABV050ET-PV-L-04; to choose intelligent switch type and intelligent regulation in the model after adding SO or SR behind respectively. Fail-Safe (power-off reset) (AC/DC95V-265V, AC/DC24V), anti-condensation heating, high-speed type, and liquid level special type should be added to the back of Fail-Safe (power-off reset) (AC/DC95V-265V, AC/DC24V), such as EABV050ET-PV-SO-05, respectively. |
