國標GB3960塑料滑動摩擦磨損試驗機北京哪家強 

產品名稱：塑料滑動摩擦磨損試驗機

Product Name: plastic sliding friction and wear testing machine

型號：M-200  

Model: M-200

一、國標GB3960塑料滑動摩擦磨損試驗機北京哪家強 特點：

First, the characteristics of:

適用于塑料制品及橡膠制品或其他復合材料的滑動摩擦，摩損性能測試。也可對試驗中試樣的摩擦力、摩擦系數和摩損量進行測定。

制造標準：GB3960 塑料滑動摩擦磨損試驗方法

Suitable for sliding friction, friction and wear properties of plastics and rubber or other composites. The friction coefficient and the friction coefficient and the friction coefficient of the test specimens can be measured.

制造標準：GB3960 塑料滑動摩擦磨損試驗方法

Manufacturing standard: GB3960 plastic sliding friction and wear test method

二、 主要適用范圍及功能

Two, the main scope of application and function

本儀器是按照GB3960設計并制造。適用于塑料制品及橡膠制品或其他復合材料的滑動摩擦，摩損性能測試。也可對試驗中試樣的摩擦力、摩擦系數和摩損量進行測定。本機采用16位單片機電子處理系統，使得本儀器各項測試指標精度非常高。由于集成程度很高，所以設備本身的穩定性，本機具有一次設置，全自動運行，實驗結束后自動停機，并檢測摩損程度。是各個科研單位，大學，企業實驗室的*檢測設備。

This instrument is designed and manufactured in accordance with GB3960. Suitable for sliding friction, friction and wear properties of plastics and rubber or other composites. The friction coefficient and the friction coefficient and the friction coefficient of the test specimens can be measured. This machine adopts 16 bit single chip microcomputer electronic processing system, makes this instrument each test target precision is very high. Due to the high degree of integration, the stability of the equipment itself is excellent, the machine has a set, automatic operation, automatic shutdown after the end of the experiment, and detect the degree of friction. It is a necessary testing equipment for all scientific research institutes, universities and enterprises.

三、 功能特點：

Three, functional characteristics:

1, sample size: 30mm*7mm*6mm + 0.1 mm

2、轉動速度： 0-200轉/分 連續可調

2, the rotation speed: 0-200 transfer / sub continuous adjustable

3、負 荷： 196N ± 0.2%（可擴充到392N）

3, load: 196N + 0.2% (can be extended to 392N)

4、摩擦環尺寸：￠40×10mm 倒角0.5×45°外圓表面與內圓同心度偏差小于0.01

4, the size of the friction ring: 40 * 10mm 0.5 * 45 degree chamfer surface of the outer circle and inner circle concentricity deviation is less than 0.01

5、摩擦力矩： 0--4N•m ±0.5%

5, friction torque: M / 0--4N + 0.5%

6、計 數 器： 0-9999小時

6, counter: 0-9999 hours

7、砝碼重量：4KG砝碼一件，1KG砝碼4件，可實現重量疊加功能。

7, weight weight: 4KG weight of one, 1KG weight 4 pieces, can achieve weight superposition function.

四、精度：

Four, accuracy:

1、速度精度：1%

1, speed accuracy: 1%

2、負荷精度：0.5%

2, load accuracy: 0.5%

3、摩擦力矩精度：1%

3, friction torque accuracy: 1%

4、計數器精度：1S

4, counter accuracy: 1S

5、傳感器測量精度：1% FS

5, sensor measurement accuracy: 1% FS

五、 主要配置：

   Five, the main configuration:

1、主機一臺

1, a host

2、高精度扭矩傳感器一只

2, high precision torque sensor

3、彩晶顯示控制系統箱一臺

3, color crystal display control system box

4、4Kg砝碼兩件（備用一套）

4, 4Kg weight two (spare one set)

5、標準磨擦環四件（備用兩件）

5, standard friction ring four (spare two)

6、臺式微型打印機一臺

6, desktop micro printer a

7、產品使用說明書一份

7, a copy of the instructions of the product

8、產品合格證

8, product qualification certificate

9、產品裝箱單一份

9, product packing list

10、整機重量：約45公斤

10, the weight of the whole machine: about 45 kg

 六、 主要技術規格：

  Six, the main technical specifications:

1、zui大試驗力：2000N

1, the maximum test force: 2000N

2、試驗力示值相對誤差:在滿量程的10%以上，不超過±2%

2, the experimental value of the relative error: in the full range of more than 10%, not more than 2%

3、試驗力示值重復性相對誤差：在滿量程的10%以上，不超過2%

3, test force repeatability of the relative error: in the full range of more than 10%, not more than 2%

4、摩擦力矩測量范圍：0-15N.m

4, friction torque measurement range: 0-15N.m

5、摩擦力矩示值相對誤差： 在滿量程的10%以上，不超過±3%

5, the value of the relative error of the friction torque: in the full range of more than 10%, not more than 3%

6、摩擦力矩示值重復性相對誤差：在滿量程的10%以上，不超過3%

6, the friction torque repeatability of the relative error: in the full range of more than 10%, not more than 3%

7、下試樣軸轉速：400，200r/min 可選擇（無級調速）

7, under the specimen shaft speed: 400200r/min can choose (stepless speed regulation)

8、上試樣軸轉速：360，180r/min

8, on the sample shaft speed: 360180r/min

9、上試樣軸向zui大移動距離：±4mm

9. The maximum moving distance of the sample on the sample is: + 4mm

10、時間控制范圍：數顯控制1s-9999min

10, time control range: digital control 1s-9999min

1 1、轉數控制范圍:數顯控制 1-999999

11, speed control: digital control 1-999999

1 2、曲線記錄及數據處理：由HX計算機實現對各個參數的測量顯示及數據處理，可時實顯示時間-摩擦力矩等多種曲線

12, curve records and data processing: the HX special computer to achieve the measurement of the various parameters of the display and data processing, can be real time display time - friction torque and other curves

產品相關關鍵字： 塑料滑動摩擦磨損 滑動摩擦磨損試驗機 摩擦磨損試驗機

Plastic sliding friction and wear sliding friction and wear testing machine friction and wear testing machine