Polyethylene filter / for dust collectors / sintered max. 100 °C | HSL-C 除塵過濾器/聚乙烯燒結100°C | hsl-c

Characteristics
特點
Material:
材質：
polyethylene
聚乙烯
Product application:
產品應用：
for dust collectors
對于除塵器
Other characteristics:
其他特點：
sintered
燒結
Description
描述
Description
描述
The base body of the HSL-C filter, which was developed in-house and is protected by patents, differs from the standard Herding® sinter-plate filter in that it is made of thermostabilized sintered polyethylene (PE). Deposition of the product on the surface – classical surface filtration – is achieved by means of a moisture-repellent PTFE coating which is embedded in the pores of the PE base body and forms a microporous surface.
hsl-c濾波器的基體，這是內部開發的，是受保護的，不同于標準的羊群®燒結板過濾器，它是由恒溫?zé)Y(jié)聚乙烯（PE）。表面上的產品的沉積-經典的表面過濾-通過一個含濕的聚四氟乙烯涂層，它是嵌入在毛孔中的聚乙烯基體，形成一個微孔表面。
The coating of PTFE combines with the base body material (PE) to guarantee extensive resistance to chemicals
聚四氟乙烯涂層與基體材料（聚乙烯）相結合，以保證廣泛的耐化學品
Through temperature stabilization of the PE it is possible to use the elements at a permanent temperature of 100° C with transient peaks of up to 110° C
通過溫度穩定的聚乙烯，它是可以使用的元素，在一個溫度為100°C與瞬態峰高達110°C.
The elements are marked with a C
這些元素被標記為
All other properties are the same as for the HSL elements
所有其他屬性都相同的數據元素
All elements are available in addition in a non-charging version CA, and the antistatic elements also come with a certificate.
所有的元素都可以在非充電版本的鈣，和抗靜電元件也有一個證書。