欣諭生產型冷凍干燥XY-GY-1000技術規格及配置
TECHNICAL SPECIFICATIONS
| General Detail 總述 | |||
| Sr. No. | Description 描述 | Specifications 規格 | |
| 1 | Mode 型號 | XY-GY-1000 | |
| 2 | Output (approx.) 產量（大約） | 1000KG | |
| 3 | Maximum ice capacity 捕冰力 | 1200kg | |
| 4 | Control 控制方式 | Microprocessor 微機處理 | |
| 5 | Dimension of unit (approx.) (L × W × H) (mm) 外型尺寸（大約）（長×寬×高） | 14500×2500×3500 (Final dimension based on design) （以最終設計尺寸為準） | |
| 6 | Weight (approx.) 重量（大約） | 38,000kg | |
| Chamber 凍干箱 | |||
| 1 | Chamber type 凍干箱外型 | Cylindrical 圓筒體 | |
| 2 | Maximum design pressure 設計壓力 | 常壓 | |
| 3 | Maximum design temperature 設計溫度 | 常溫 | |
| 4 | Finish 內部拋光度 | Ra≤0.5um (0.5Mircon) | |
| 5 | Validation port 驗證孔 | Included 有（1個）位置箱體頂部 | |
| 6 | Viewing port 視鏡 | Illuminated 帶遠射燈【廣角】 | |
| Number 數量 | 1 | ||
| Location 位置 | Side 側面 | ||
| Dimension 尺寸 | DN200 (mm) | ||
| 7 | Material 材質 | ||
| Internal 內部 | SUS 304 | ||
| Insulation 保溫 | polyisocyanurate foam 聚氨酯發泡材料 | ||
| External cover 外部 | SUS 304 | ||
| Door 箱門 | |||
| 1 | Finish 拋光度 | Ra≤0.5um (0.5Mircon) | |
| 2 | Viewing port 視鏡 | Included 有 | |
| Number 數量 | 1 | ||
| Location 位置 | On height 1.5m (approx.) 高度1.5米（大約） | ||
| 3 | Open direction 開門方向(根據客戶要求） | Right (face to door, hinge on right side) 右開（面對箱門，鉸鏈在右） | |
| 4 | Open angle 開門角度 | More than 110o 大于110度 | |
| 5 | Gasket 密封圈 | O-shaped silicone rubber single gasket O型硅橡膠單密封 | |
| 6 | Locking arrangement 門鎖方式 | Auxiliary manual handle 輔助手柄 | |
| 7 | Material 材質 | ||
| Internal 內部 | SUS 304 | ||
| Insulation 保溫 | polyisocyanurate foam 聚氨酯發泡材料 | ||
| External cover 外部 | 304 | ||
| Shelves 板層 | |||
| 1 | Temperature range 溫度范圍 | -45~-50°C to + 80°C | |
| 2 | Temperature sensors (shelves) 板層溫度探頭 | 3 | |
| Silicone oil inlet 導熱油進口 | |||
| Silicone oil outlet 導熱油出口 | |||
| 3 | sensors 溫度探頭 | 3 | |
| 4 | Number of shelves 板層數 | 16+ 1(upper radiant shelf) （溫度補償板） | |
| 5 | Dimension (L × W × T) (mm) 板層尺寸（以設計為準） | 4000x1600x15 | |
| 6 | area (sq. m) 面積 | 102 | |
| 7 | Spacing (mm) 板間距 | 65 | |
| 8 | Hose of flexible connection 軟管連接 | Welding 焊接 | |
| 9 | Finish 拋光度 | Ra≤0.5um (0.5Micron) | |
| 10 | Level 平整度 | ≤±0.5mm/m | |
| 11 | Material 材質 | SUS 304 | |
| Condenser 冷凝器 | |||
| 1 | Condenser type 冷凝器外型 | Cylindrical 圓筒體 | |
| 2 | Viewing port 視鏡 | Illuminated 帶遠射燈【廣角】 | |
| Number 數量 | 1 | ||
| Location 位置 | Easily observe the whole inside condenser 容易觀察到整個箱體內部 | ||
| Dimension 尺寸 | DN200 (mm) | ||
| 3 | Final temperature 溫度范圍 | -65°C~-70℃ | |
| 4 | Cooling time (+20 to -40°C) 制冷速度(空載) | ≤30 minutes (empty) | |
| 5 | Maximum design pressure 設計壓力 | 常壓 | |
| 6 | Maximum design temperature 設計溫度 | 常溫 | |
| 7 | Finish 拋光度 | Ra≤0.5um (0.5Mircon) | |
| 8 | Coiled pipe material 盤管材質 | SUS 304 | |
| Internal 內部 | SUS 304 | ||
| Insulation 保溫 | polyisocyanurate foam 聚氨酯發泡材料 | ||
| External cover 外部 | SUS 304 | ||
| Shelf Heating / Cooling 板層升溫/降溫 | |||
| 1 | Circulation pump 循環泵 | ||
| Brand 品牌 | DF | ||
| Model 型號 | CDL65-1 | ||
| Type 形式 | Centrifugal pump 離心式 | ||
| Number 數量 | 1 | ||
| Motor power 電機功率 | 5.5kW | ||
| 2 | Plate heat exchanger 板式熱交換器 | ||
| Brand 品牌 | Hexnovo | ||
| Type 方式 | Sealed brazed stainless steel 不銹鋼封蜂窩式 | ||
| Number 數量 | 1 | ||
| 3 | Heater 電加熱 | PID control PID 控制【雙組電加熱系統】 | |
| 4 | Maximum heating power 加熱功率 | 24KW*4 | |
| 5 | Thermal fluid 導熱介質 | Special heat conducting oil for freeze dryer 凍干機專用導熱油 | |
| 6 | Shelf cooling time (+20°C to -40°C) 板層制冷速度(空載) | ≤60 minutes (empty) | |
| 7 | Heating rate 加熱速度(大約) | 1°C/min (approx.) | |
| Refrigerating System 制冷系統 | |||
| 1 | Compressor 壓縮機 | ||
| Brand 品牌 | RefComp 萊富康（意大利） | ||
| Model 型號 | SW3L10500 | ||
| Type 方式 | Two-stage 雙級 | ||
| Number 數量 | 2 | ||
| Motor power 電機功率 | 78kW *2 | ||
| 2 | Refrigerant 制冷劑 | HFC-free R404A | |
| Main refrigerating units 主要制冷元件 | |||
| 1 | Thermostatic expansion valve 熱力膨脹閥 | Danfoss | |
| 2 | Solenoid valve 電磁閥 | Danfoss | |
| 3 | Service valve關斷閥 | Denaline | |
| 4 | Safety valve安全閥 | Castel | |
| 5 | Capped valve頂蓋閥 | Castel | |
| 6 | Sight glass視液鏡 | Danfoss | |
| 7 | Water cooling condenser水冷凝器 | Teyi | |
| 8 | Oil separator 油分離器 | Fasike | |
| 9 | Gas-liquid separator 汽液分離器 | Fasike | |
| 10 | Filter 過濾器 | 濾殼Hongguo濾芯 ALCO | |
| Vacuum System 真空系統 | |||
| 1 | Final vacuum 真空 | ≤2.7×10 -2mbar | |
| 2 | Evacuation time 抽氣速度 | ≤30minutes (1×103 mbar to 1×10-1 mbar) | |
| 3 | Vacuum pump 真空泵 | ||
| Brand 品牌 | Baosi | ||
| Model 型號 | BSV90 | ||
| Type 方式 | OIL-rotary 油旋片式真空泵 | ||
| Number 數量 | 6 | ||
| Flow rate 排氣速度 | 90m3/hr (×6) | ||
| Motor power 電機功率 | 3.7Kw (×3) | ||
| 5 | Mechanical booster pump 羅茨泵 | ||
| Brand 品牌 | BAOSI | ||
| Model 型號 | BSJ300L | ||
| Type 方式 | Roots 機械式 | ||
| Number 數量 | 1 | ||
| Flow rate 抽氣速度 | 1000m3/hr (×2) | ||
| Motor power 電機功率 | 3.7KW (×2) | ||
| 6 | Anti-suction valve 真空防倒吸閥 | Included 有 | |
| Control System 控制系統 | |||
| 1 | Software 軟件 | 欣諭-5000（可免費升級） | |
| Automatic 自動 | Included 有 | ||
| Manual 手動 | Included 有 | ||
| 2 | PLC+PC 可編程控制器 | Omron | |
| 3 | Industrial personal Computer 工控機 | 品牌平板電腦 | |
| 4 | Vacuum gauge 真空探頭 | ZHVAC | |
| 5 | Temperature probe 溫度探頭 | Pt100 | |
| 6 | Pressure transducer 壓力變送器 | GK | |
| 7 | Breaker 空開 | schneider | |
| 8 | Contactor 接觸器 | schneider | |
| 9
| Relay 繼電器 | schneider | |
| Safety System 安全系統 | |||
| 1 | Vacuum failure protection 真空失敗保護 | Included 有 | |
| 2 | Temperature failure protection 溫度失敗保護 | Included 有 | |
| 3 | Compressor protection 壓縮機保護 | Included 有 | |
| 4 | Other motors protection 其它電機保護 | Included 有 | |
| 5 | Interlock protection 連鎖保護 | Included 有 | |
| Utility Requirement (approx.) 公用工程消耗(大約) | |||
| 1 | Electricity - total electrical load 總裝機功率 | 270kW (380V, 50Hz, 3Phase, 5Wire) | |
| 2 | Cooling water for refrigerant cooling 用于制冷系統的冷卻水 | 60m3/hr (1.5≤P≤2bar, T≤25°C) | |
