LR 1000 control System
The LR 1000 control is a cost efficient, modular laboratory reactor designed to optimize chemical reaction processes as well as for mixing, dispersing and homogenization tasks on a lab scale particularly in the cosmetic and pharmaceutical industry. The system can be adapted quickly and easily to a wide range of applications and specific requirements.
Prominent features are its intuitive menu navigation, integrated pH and temperature sensor connection as well as several interfaces that allow display and storage of process-relevant data on a PC. By using the laboratory software labworldsoft® (accessory) it is possible to even control the reactor via PC and make further settings. In addition, a control valve connection to attach a magnetic valve (accessory) for program-based cooling water control is integrated.
The medium can be heated either to a fixed maximum temperature of 120 °C or to a set temperature by the heater at the bottom of the vessel. A temperature sensor inside the medium ensures that the set temperature is reached. Both, a PT 100.30 temperature sensor and the corresponding receptacle LR 1000.61 for the lid are included in the delivery.
- Components in contact with medium: stainless steel (ALSI 316 L), FFKM, PTFE, PEEK, borosilicate glass 3.3
- Large easy to read TFT display for easy menu navigation
- Integrated control valve connection to attach a magnetic valve (accessory) for program-based cooling water control
- Integrated weighing function
- Torque trend measurement indicates changes in product viscosity
- Integrated pH sensor connection
- RS 232 and USB interface to operate the unit with the laboratory software labworldsoft
- Standard joint fittings on the lid: 2 x NS 29, 2x NS 14, 2 x GL 14 for flexible adaptation of further equipment
- Expandable for use with the ULTRA-TURRAX® T 25 digital (accessory)
- Vacuum valve included in delivery
- Anchor stirrer with PTFE-scrapers
- Connections to attach a cooling source to the back of the unit
- Manual adjustable safety circuit
- Integrated safety shutdown when vessel or lid is removed from the base
技術參數
| 使用容積 | 1000 ml |
| 帶分散刀具的最小樣品處理量 | 500 ml |
| 工作溫度 | 120 °C |
| 可達到真空 | 25 mbar |
| 粘度 | 100000 mPas |
| 速度范圍 | 10 - 150 rpm |
| 支桿直徑(含集成固定支架) | 16 mm |
| 物料接觸部分材料 | AISI 316L, 1.4571, 硼硅鹽玻璃 3.3, PTFE, PEEK, FFKM |
| 反應容器開口(件數/標準) | 2x NS 29/32, 2x NS 14/23 & 2x GL 14 |
| 允許連續運轉時間 | 100 % |
| 溫度測量精度 | 0.1 K |
| 額定轉矩 | 3 Nm |
| 加熱輸出功率 | 1000 W |
| 冷卻介質允許工作壓力 | 1 bar |
| 稱重范圍 | 2000 g |
| 稱量分辨率 | 1 g |
| PH測量范圍 | 0 - 14 pH |
| PH測量分析 | 0.1 pH |
| 最小轉速 (可調節) | 10 rpm |
| 加熱溫度 | 180 °C |
| 可調的安全回路 | 47 - 225 °C |
| 可調的安全回路，偏差 | 10 - 20 ±K |
| 冷卻介質溫度 | 3 °C |
| 加熱溫度控制精確度 | 1 ±K |
| 帶傳感器控溫精確度 | 0.2 ±K |
| 轉速偏差 | 5 ±rpm |
| 轉速顯示 | TFT |
| 加熱溫度控制 | TFT |
| 外接溫度傳感器接口 | PT 100 |
| 攪拌槳固定 | 特殊輸出軸 |
| 轉矩顯示 | 是 |
| 轉矩測量 | 趨勢 |
| 計時器 | 是 |
| 計時器顯示 | TFT |
| 轉速控制 | 1 RPM/步 |
| 冷卻方式 | 流量 |
| 溫度顯示 | 是 |
| 工作溫度傳感器 | PT 100 |
| 安全溫度傳感器 | PT1000 |
| 工作溫度顯示 | TFT |
| 安全溫度顯示 | TFT |
| 外接傳感器使用顯示 | 是 |
| 保險斷路 | 是 |
| MV1 接口 | 是 |
| pH傳感器接口 | 是 |
| pH值顯示 | TFT |
| 外形尺寸 | 443 x 360 x 295 mm |
| 重量 | 23 kg |
| 允許環境溫度 | 5 - 40 °C |
| 允許相對濕度 | 80 % |
| DIN EN 60529 保護方式 | IP 21 |
| RS 232接口 | 是 |
| USB接口 | 是 |
| Bluetooth接口 | 是 |
| 電壓 | 230 / 115 V |
| 頻率 | 50/60 Hz |
| 儀器輸入功率 | 1200 W |
