產品描述
德國Elektrophysik（EPK）PENTEST筆式涂層測厚儀------新一代拉拔式涂層測厚儀，PENTEST是德國EPK公司新推出的一款堅固的筆試涂層測厚儀 應用磁吸力原理，用于快速無損簡便地測量鐵基體上的非磁性涂層，如鋼鐵上的涂料、搪瓷等。測量范圍25 - 700μm。PENTEST手持式筆式涂層測厚儀可保持保留*后一個讀數，測量原理符合DIN EN ISO 2178.不需要電池或其他電源。設計為鋼筆樣式，便于攜帶，可在任何地點任何時間進行測量，只需將儀器*放在干燥的油漆涂層上即可。使用你的拇指，使其與被測表面緊密接觸。 然后小心地拉起黑色滑塊，直到磁鐵離開涂層表面。
| PENTEST產品特點 | PENTEST技術參數 |
| 無損測量鐵基上的非磁性涂層,如油漆、搪瓷、橡膠、鉻鋼。 采用性磁頭 無需電源供應 無需標定 在任何角度可以測試 操作簡單，攜帶方便 價格便宜 | 測量范圍： 25-700um或1-28mils 小測量面積： 直徑25mm 精確度： ±10%讀數 環境溫度： -10~+80℃ 體積： 長151mm，直徑10mm 德國EPK還有MINI PEN筆式測厚儀，量程為50-500um。精確度： ±15%讀數。 其他測厚系列有：MikroTest系列，MiniTest系列。 |
PENTEST英文介紹
Featuring a patented HOLD mechanism, this dry film gauge keeps the thickness indicator in place for easy reading. The HOLD mechanism can be used as a “memory” for the last reading. Major applications are quick-check measurements on steel constructions, painted steel panels and all kinds of steel substrates. Measuring principle according to DIN EN ISO 2178. No batteries or other power supply required.
Easy to use:
Designed as a pen with a pocket clip, the gauge is ready for use at any place or time. Just place the tip of the gauge onto the dry paint coating as shown on the photo. Use your thumb to give it a firm contact to the surface to be measured.
Then pull up carefully the black slide until the magnet lifts off from the coating surface. Read coating thickness in microns on the 50 mm long scale, longer than the scale of any other pull-off gauge.
Application
Non-destructive measurement of:
