氣動電磁閥
Product information

CFHC10-0.8礦用本安型氣動電磁閥(以下簡稱電磁閥),是根據按MT209-1990《煤礦通訊、檢測、控制用電工電子產品通用技術要求》的要求來設計制造,主要用于煤礦井下氣動設備的自動控制。
Cfhc10-0.8 mine intrinsic safety pneumatic solenoid valve (hereinafter referred to as the solenoid valve) is designed and manufactured according to the requirements of mt209-1990 general technical requirements for electrical and electronic products for communication, detection and control in coal mines, mainly used for the automatic control of underground pneumatic equipment in coal mines.
氣動電磁閥
Use environment
溫度: 0℃~40℃; | 大氣壓力: 80 kPa~110kPa; |
相對濕度:≤98%(+25℃時) | 貯存溫度為:-40℃~60℃ |
具有甲烷、煤塵爆炸性混合物,但無破壞絕緣的腐蝕性氣體的煤礦井下。

氣動電磁閥
Working principle
結構:電磁閥由閥體和電磁閥頭兩部分組成。
工作原理: 電磁閥頭通電時,電磁閥導通,動作時間小于2s;斷電時,電磁閥關閉,關閉時間小于4s。
Structure: the solenoid valve is composed of valve body and solenoid valve head.
Working principle: when the solenoid valve head is powered on, the solenoid valve is on, and the action time is less than 2S; when the power is off, the solenoid valve is closed, and the closing time is less than 4S.

氣動電磁閥
technical parameter

額定電壓:DC12V;額定電流:≤ 266mA
輸入氣壓:0.2~0.8MPa。
電磁閥閥徑:10mm
本安參數:Ui: DC 12.5V Ii:266mA Ci: 0uF Li: 0mH
氣動電磁閥
Matters needing attention
1、安裝使用及注意事項
2安裝使用前應認真閱讀本說明書。
3、檢修時不得修改本安電路及關聯電路中的元器件型號、規格及電器參數等。
4、嚴禁帶電開蓋及帶電維修;
5、產品只能與說明書中規定的關聯設備配接,與其它設備配接時,必須經防爆審查和檢驗。
1、產品在運輸過程中不應有劇烈的振動、沖擊。
2、產品不得曝曬雨淋,應存放在空氣流通無腐蝕性氣體的庫房中。
氣動電磁閥
After-sale service


隨機備附件清單。


現的質量問題,我公司實行三包。

應注明要貨單位、型號、規格、數量等。
請在訂貨時寫明企業稅號、開戶行、帳號、地址和電話。
注:超標準范圍使用和使用錯誤,自行改裝,不適當?shù)木S修等原因,引起的故障,公司不負責任,可作有償修理或更換。
如用戶需選用附件、關聯件,按所訂型號由公司提供,以保證質量,如用戶自行選購或改裝,本公司不負責任。