--- 美國SPEX CLP項目標液 ---

ICP-MS檢出限檢驗標液1

ICP-MS Contract Required Detection Limit Standard 1

元素：500mg/L: Ca, K, Mg, Na
20mg/L: Al, Ba
10mg/L: Fe
6mg/L: Sb
5mg/L: Co, V
4mg/L: Ni
2.5mg/L: Cu
2mg/L: Zn
1.5mg/L: Mn
1mg/L: Ag, As, Cr, Tl
0.5mg/L: Be, Cd, Se
0.3mg/L: Pb
基體：5% HNO3/tr Tartaric Acid
體積：125mL
編號：CL-CRDL-1

用途：Claritas PPT 級，電感耦合等離子體質譜儀（ICP-MS）分析用元素標液。EPA合約實驗室CLP項目標液。
證書：每份標液都附有一份內容詳細的標準物質證書，證書報告標液中多至68種痕量雜質元素含量實際測量結果。
溯源：美國NIST SRM  (Traceable by NIST SRM)

**應用參考 · INSTRUCTION**

合約檢出限和儀器檢出限高者，需運行標液于2倍檢出限值進行檢測。樣品測試開始和結束前檢測檢出限，或者8小時班至少2次檢測檢出限。所有測試到的元素都需檢測檢出限，除了Al, Ba, Ca, Fe, Mg, Na, K元素。標液CRDL-1，對于ICP，在運行2倍檢出限值檢測前，應稀釋1000倍使用；對于AA，在1倍值檢測前，應稀釋2000倍使用。
A standard must be run at two times the Contract Required Detection Limits (CRDL), or at two times the Instrument Detection Limits (IDL), whichever is greater. This standardization is performed at the start and the end of each sample analysis or at least twice in each eight hour shift. All elements to be analyzed must be run except Al, Ba, Ca, Fe, K, and Na.
Our CRDL-1 standard contains all of the required elements on the TAL, in their appropriate concentration ratios. CRDL-1 should be diluted by a factor of 1,000 prior to use in the “two times CRDL” run for ICP-AES analysis. For analysis by atomic absorption, CRDL-1 should be diluted by a factor of 2,000 prior to use in the “one time CRDL” run.
For CLP ISM 02.0 and CLP ILM 05.2