JSH0102潤滑油氧化安定性測定儀(旋轉氧彈法)

一、符合SH/T0193、ASTMD2272標準

二、主要技術參數：

控溫范圍：常溫～150℃±0.1℃  

測壓范圍：0～1.6Mpa

顯示方式：彩色液晶屏顯示

旋轉臺數：2個                

旋轉速度：100±5r/min

加熱速度：常溫～150℃   ≤2h

工作電源：AC220V±10%  50HZ

三、性能及特點：

1、采用單片機控制，能自動記錄壓力及其變化過程，并用曲線描繪出來自動打?。?/span>

2、采用彩色液晶屏顯示并記錄兩個氧彈的壓力，氧彈上裝有日本進口的旋轉接頭,并通過壓力傳感器將壓力轉換成電信號，直接從顯示屏上觀察到氧彈在充氧后是否泄漏，以及在試驗過程中是否已達到規定的壓力降，數據顯示直觀、方便、精度高、無泄漏；

3、旋轉電動機位于油浴上部，通過傳動裝置使氧彈按100±5r/min速度旋轉，長期使用不會出現漏油的現象；

4、采用兩個氧彈旋轉座，可同時裝入兩支氧彈，便于做平行試驗；并在旋轉臺底座上裝有葉片，在氧彈旋轉時起到攪拌作用。

5、儀器在試驗完畢后或在查詢過程中，用戶可根據需要打印出結果；

6、儀器亦符合SH/T0074-91標準， 增加配件后也可做汽油機油薄層吸氧氧化安定性的測定；

JSH0102 Lubricating oil Oxidation stability tester (rotating oxygen bomb method)

I. It conforms to SH/T0193 and ASTMD2272 standards

Ii. Main Technical parameters:

Temperature control range: normal temperature ~ 150℃±0.1℃

Pressure measuring range: 0 ~ 1.6mpa

Display mode: color LCD display

Number of rotations: 2

Rotation speed: 100±5r/min

Heating speed: normal temperature ~ 150℃ ≤2h

Power supply: AC220V±10% 50HZ

Iii. Performance and Characteristics:

1. Controlled by single chip microcomputer, it can automatically record the pressure and its change process, and draw out the curve for automatic printing;

2, use color LCD screen display and record the pressure of the two oxygen bomb, bomb in rotary joints with imported from Japan, and through the pressure sensor to convert pressure into electrical signals, directly from the display screen observed a leaky oxygen bomb after oxygenation, and whether in the process of test has reached the pressure drop, according to intuitive, convenient, high precision, no leakage;

3. The rotating motor is located on the upper part of the oil bath. The oxygen bomb is rotated at the speed of 100±5r/min by means of the transmission device.

4. Two oxygen bomb rotating seats can be used to load two oxygen bombs at the same time, which is convenient for parallel test; Blades are installed on the base of the rotary table to stir the oxygen bomb as it rotates.

5. After the completion of the test or during the inquiry process, the user can print out the results as required;

6. The instrument also conforms to SH/T0074-91 standard. After adding accessories, it can also be used for the determination of oxygen absorption and oxidation stability of gasoline oil thin layer;