主要零件和材質 Main parts and materials

產品結構特點 Construction features

1、中線蝶閥為整個蝶板與閥座在360°圓周內同心(中線)，具有雙向密封功能，壓力、流量可自由調節；
2、偏心蝶閥為二維方向偏心產品的凸輪效應會使密封副產生足夠的密封比壓，并且隨著工作壓力的升高，密封效果更理想；
 3、四級加載彈性密封，保證了閥門內、外的零泄漏。
 a: 軸與蝶閥一體外襯F46;
 b: 軸頭端面采用彈性O型圈和軸肩處剛性墊圈、彈性橡膠墊組合；
 c: 軸的徑向采用O型圈與金屬軸套的組合；
 d: 閥座鑲嵌有彈性條的閥體槽內。
 4、采用可彈性墊片定位準確，結構簡單。(*采用O型圈是為了防止意外泄漏時的安全措施)。
1, the center line butterfly valve for the whole of the butterfly plate and valve seat in 360 ° circumferential concentric (middle), have two-way sealing function, pressure and flow rate can be adjusted freely;
2. The CAM effect of eccentric butterfly valve in the 2d direction eccentric product will make the sealing side produce sufficient sealing ratio pressure, and the sealing effect is more ideal as the working pressure increases.
3. Four-level loading elastic seal ensures zero leakage inside and outside the valve.
 A: the shaft and butterfly valve are lined with F46;
 B: the shaft end adopts the elastic o-ring and the axial shoulder rigid washer and elastic rubber pad;
 C: the radial direction of the shaft adopts the combination of o-ring and metal bushing;
 D: seat inlaid with elastic strip.
4. The elastic gasket is used to position accurately and the structure is simple. * use O rings to prevent accidental leaks.

產品特征 Spericfications

適用介質：適用于各種濃度的王水、氫氟酸和各種有機酸、強酸、強氧化劑等介質
適用溫度：-196~150℃
驅動方式：手動、氣動、電動、液動等
公稱壓力：0.6~1.6MPa
公稱通徑：DN50~1200mm
Applicable media: Applicable to all kinds of concentrations of aqua regia,
hydrofluoric acid and various organic acids, strong acids and powerful oxidizing agents
Applicable temperature: -196~150℃
Driver: manual, pneumatic, electric, hydraulic, etc
Nominal pressure: 0.6~1.6MPa
Nominal size: DN50~1200mm

技術規范 Technical specification

試驗壓力 Test prssure

蝶閥結構長度和外接尺寸 Main connection dimensions