IEPE是指一種自帶電量放大器或電壓放大器的加速度傳感器。IEPE是壓電集成電路的縮寫。因為由加速度傳感器產生的電量是很小的,因此傳感器產生的電信號很容易受到噪聲干擾,需要用靈敏的電子器件對其進行放大和信號調理。IEPE中集成了靈敏的電子器件使其盡量靠近傳感器以保證更好的抗噪聲性并更容易封裝。
美國Dytran的3056D8是一款IEPE加速度傳感器/振動傳感器,靈敏度5mV/g,集成陶瓷剪切感應元件,鈦合金外殼,應對潮濕和多塵的惡劣工作環境。
The Dytran model 3056D8 is a cost effective, single axis IEPE accelerometer offered with a sensitivity of 5 mV/g.
Design of the Dytran 3056D8 features a ceramic shear sensing element packaged within a rugged titanium housing, and incorporates a 10-32 axial connector and 10-32 stud mounting capabilities. Model 3056D7 is base isolated to avoid EMI/ground loop interference and incorporates low noise JFET electronics. Units are also hermetically sealed for reliable performance in high humidity and dirty environments.
特性
1. 5 mV/g sensitivity
2. 1,000g range
3. 1 to 10,000 Hz frequency range (±10%)
4. 10-32 axial connector
5. 10-32 tapped hole
6. 10 grams
7. Titanium
8. Hermetically sealed
9. Base isolated
10. IEPE
應用
1. Modal analysis
模態分析
2. Vibration control
振動控制
3. General purpose vibration monitoring
一般用途振動監測
Weight 0.35 oz 10 grams
Connector Type 10-32 10-32
Sensitivity, ±5% [1] 5 mV/G 0.5 mV/m/s2
Range for ± 5 Volts Output 1,000 G peak 9810 m/s2
Frequency Response, ±10% 1 to 10,000 Hz 1 to 10,000 Hz
Resonant Frequency > 36 kHz > 36 kHz
Broad Band Resolution 0.008 G rms 0.08 m/s2 rms
Linearity [2] ±1 % F.S. ±1 % F.S.
Maximum Transverse Sensitivity 5 % 5 %
Strain Sensitivity @ 250με 0.001 G/με 0.01 m/s2/με
ENVIRONMENTAL
Maximum Vibration 600 G peak 5886 m/s2 peak
Maximum Shock 3000 G peak 29430 m/s2 peak
Temperature Range -67 to 250 °F -55 to 121 °C
Seal HERMETIC HERMETIC
ELECTRICAL
Supply Current Range [3] 2 to 20 mA 2 to 20 mA
Compliance Voltage Range +18 to +30 Volts +18 to +30 Volts
Output Impedence,Typ 100 Ω 100 Ω
Bias Voltage +9 to +13 VDC +9 to +13 VDC
Discharge Time Constant .5 to 1.5 Sec .5 to 1.5 Sec
Electrical Isolation 10 GΩ,min 10 GΩ,min
訂貨型號
型號 | 靈敏度(mV/g) | 頻率響應(Hz) | 時間常數(秒) | 工作溫度(°F) |
3056D1 | 10 | 1 - 10000 | 0.5 – 1.5 | -67 - +250 |
3056D2 | 100 | 1 - 10000 | 0.5 – 1.5 | -67 - +250 |
3056D3 | 500 | 1 - 10000 | 0.5 – 1.5 | -67 - +250 |
3056D4 | 20 | 1 - 10000 | 0.5 – 1.5 | -67 - +250 |
3056D5 | 50 | 1 - 10000 | 0.5 – 1.5 | -67 - +250 |
3056D6 | 200 | 1 - 10000 | 0.5 – 1.5 | -67 - +250 |
3056D7 | 1 | 1 - 10000 | 0.5 – 1.5 | -67 - +250 |
3056D8 | 5 | 1 - 10000 | 0.5 – 1.5 | -67 - +250 |
配件
1. Model 6200 mounting stud (10-32 to 10-32)
2. Model 4110C current source power unit, model 6196 magnetic mounting base, model 6213 adhesive mounting base
3. 配套電纜線:6010A, 6011A, 6012A, 6016A, 6018A, 6022A, 6026A, 6032A, 6033A, 6049A, 6050A, 6051A, 6053A, 6054A, 6066A, 6069A, 6093A, 6099A, 6400A, 6401A, 6412A, 6429A, 6924A, 6930A, 6991A
相關型號
3056D1T (TEDS)
3056D2T (TEDS)
3056D3T (TEDS)
3056D4T (TEDS)
3056D5T (TEDS)
3056D6T (TEDS)
3056D7T (TEDS)
3056D8T (TEDS)
3056B
3056C(高溫型)