、二氧化氯檢測儀產品概述
適用于大、中、小型水廠及工礦企業、生活或工業用水的二氧化氯濃度檢測，以便控制水的二氧化氯達到規定的水質標準。
二、二氧化氯檢測儀產品原理：
本儀器應用微電腦光電子比色檢測原理取代傳統的目視比色法。消除了人為誤差，因此測量分辨率大大提高。
技術參數
測量范圍
0-2mg/L
zui小示值
0.001mg/L
重復性
≤2%
精度
±5%FS±1個字
充電器
AC 220V 50Hz
三.二氧化氯檢測儀特點：
1.全中文菜單、微電腦，輕觸式鍵盤，LCD液晶數字清晰顯示，使用方便。
2.采用分光光度的光電比色原理， 應用方便試劑，水樣放入試劑反應后幾分鐘即可讀數，數字顯示測定值。
3.本公司特制的技術LED光源自動控制電路，光源穩定，解決了開機必須預熱問題。其光源壽命長達20年，開機時無需預熱，可直接使用。
4.主機內可配置大功率電池，可用于野外現場定量測量，充電2小時可連續使用4小時，即充即用。
5.儀器內存儲有全量程范圍內的標定曲線 ，具有斷電保護，標定數據不會丟失?？勺詣诱{(diào)零和5點自動校正，數據有非線性處理及數據平滑功能，儀表zui小讀數為0.001mg/L。
6.融合多項自主設計成果，技術*，符合國標GB/T5750-2006生活飲用水衛生標準。
關于更多 二氧化氯檢測儀 詳細資料請您
A, chlorine dioxide tester Product Overview
The concentration of chlorine dioxide is suitable for detecting large, medium, small water and industrial and mining enterprises, domestic or industrial water, in order to control the water chlorine dioxide required water quality standards.
Two, chlorine dioxide detector principle:
The instruments used in microcomputer photoelectron colorimetric detection principle to replace the traditional visual colorimetry. Eliminate the human error, thus greatly improve the measurement resolution.
Technical parameters
Measuring range
0-2mg/L
Minimum value
0.001mg/L
Repeatability
2%
Precision
± 5%FS ± 1 words
Charger
AC 220V 50Hz
Three characteristics of chlorine dioxide tester:
1 all Chinese menu, microcomputer, touch type keyboard, LCD LCD digital display, easy to use.
2 photoelectric spectrophotometric colorimetry principle, application convenient reagent, water into the reaction after a few minutes reading, digital display of measured values.
Automatic control circuit, patent technology LED light of 3 the company special light source stability, solve the problem must be pre boot. The lamp life of up to 20 years, the boot without preheating, and can be used directly.
4 the host configuration of high power battery, can be used for quantitative measurement of field, charging 2 hours to 4 hours of continuous use, charging and using.
The 5 instrument is stored in the full range of the calibration curve, with power protection, calibration data will not be lost. Automatic zero adjustment and 5 point automatic calibration, data with nonlinear processing and data smoothing function, minimum meter readings for the 0.001mg/L.
6 fusion independent design patents, a number of advanced technology, in line with the national standard GB/T5750-2006 sanitary standard for drinking water.
會員1.png)
