當前位置：杭州品享科技有限公司>>>>Sample Holder E-Flute

Sample Holder E-Flute

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質經銷商

所在地

在線詢價 收藏產品查看聯系電話

聯系方式：周寅查看聯系方式

更新時間：2025-01-18 12:32:45瀏覽次數：32次

聯系我時，請告知來自環保在線

產品分類 品牌分類

暫無信息

杭州品享科技有限公司

經營模式：經銷商

商鋪產品：142條

所在地區：浙江杭州市

聯系人：周寅（銷售總監）

詢價 給他留言

產品簡介

ThePN-PAC-EsampleholderE-fluteisanecessaryaccessoryforPATtest

詳細介紹

The PN-PAC-E sample holder E-flute is a necessary accessory for PAT test. The sample holder consists of a lower pin holder, an upper pin holder, and pins. It has the characteristics of convenient operation, no need adjustment, and strong applicability. It can be used to determine the PAT of corrugated cardboard with a compression strength tester.
PAT tests have strict requirements on the thickness and type of corrugated cardboard. The thickness of single corrugated cardboard should be higher than the lower limit of the corresponding corrugation height specified in the table. For corrugated structures, UV-type structures are required.

Flute	Flute hight h/mm	Flute width t/mm	Amount pcs/300mm
E	1.1~2.0	3.0~3.5	93±6

Technical parameter

Pin diameter:φ1.0mm(E Typeoptinal);
Sample size: 25mm×100mm;
Pin axis parallel to the bottom of error: after sample loaded﹤100(1); when force 300N ﹤200(1);
Max. dimension with sample: 48 X 46 X36mm
Working environment:Room temp（20 ± 10 ）°C;humidity ＜ 85％;
Note: When cutting a specimen with a length of 25mm × 100mm pay attention to the direction of the corrugation. The direction of the corrugation is the short side.