美國DAKOTA VX手持式超聲波聲速測定儀|VX球化率儀|VX聲速儀

DAKOTA公司VX是一種手持式超聲波聲速測定儀(球化率儀)。當被測定的材料是鑄件、合金或者塑料時，VX球化率儀就會測出聲波穿過它們時的速度。因此，可得出所測材料內部組織是否緊密無缺陷。 如可預先將球墨鑄鐵不同球化率百分比(通過金相法)試樣做出，分別測量其不同的聲速值，然后和實際工件的聲速值進行比較，以此判斷球化率情況。用于對鑄件進行批量檢查。
 

With the hand-held VX Ultrasonic Velocity gauge, you can determine material velocities by measuring a known thickness, entering a known thickness into the VX, and the material velocity will be displayed. The tool’s backlit display is easy to read, even in dim light, and the unit operates for up to 200 hours on a single set of batteries.

The VX comes complete, ready to use and is protected by Dakota Ultrasonics 5 year limited warranty.

VX球化率儀|VX聲速儀技術參數：

測量
聲速范圍：1250～10000m/s
厚度范圍：0.63～500mm(可以選擇英制或公制)
分辨率：0.01mm
聲速范圍：1250～10000m/s
單點測量時為每秒4個讀數
掃查測量時為每秒16個讀數
采用單點測量模式校驗已知厚度或聲速
 

顯示
4位半液晶顯示屏；
顯示讀數高為0.5英寸；
背光可選開/關/自動；
測量值以英寸/微秒或米/秒顯示；
條形圖指示讀數穩定。

其他
電源：2節5號電池。連續使用時間達200小時，當電池供電不足時，顯示器會閃爍報警，直至自動關機
鍵盤：6鍵防水、防油鍵盤
操作溫度：-20℃～50℃
尺寸：63.5x114.3x31.5mm
重量：300g
包裝：ABS工程塑料箱。

VX球化率儀|VX聲速儀常用探頭 

With the hand-held VX Ultrasonic Velocity gauge, you can determine material velocities by measuring a known thickness, entering a known thickness into the VX, and the material velocity will be displayed. The tool’s backlit display is easy to read, even in dim light, and the unit operates for up to 200 hours on a single set of batteries.

The VX comes complete, ready to use and is protected by Dakota Ultrasonics 5 year limited warranty.

• Range: Measures from 0.025 to 19.999 inches (0.63 to 500 millimeters)
• Switch to select English or metric units.
• Resolution: 0.001 inch (0.01 millimeter)
• Velocity Range: .0492 to .3937 in/m s
  1250 to 10,000 meters/sec
• Built-in: Stainless steel reference disk for probe zeroing.
• Four readings per second for single point measurements or 16 per second in SCAN mode.
• Single and Two point calibration option included.

 POWER SOURCE

• Two 1.5V alkaline or 1.2V NiCad AA cells.
• Typically operates for 200 hours on alkaline and 130 hours on NiCad.

DISPLAY

• Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions.
• Measurements displayed in inches, inches/microsecond, millimeters, and meters/second.
• Bar graph indicates stability or reading.

CERTIFICATION

• Factory calibration traceable to national standards.

WARRANTY

• 5 year limited.
•  

PHYSICAL

• Weight: 10 ounces
• Size: 2.5 W x 4.75 H x 1.25 D inches
  63.5 W x 120.7 H x 31.8 D mm
• Operating Temperature: -20 to 120F (-20 to 50C)
• Case: Extruded aluminum body / nickel plated aluminum end caps. Resistant to impact and environmentally sealed.

KEYPAD

• Sealed membrane that is resistant to both water and petroleum products.
• Six tactile-feedback keys.

TRANSDUCER

• Dual element (transmit and receive)
• 1 to 10 MHz frequency range.
• Locking quick disconnect Lemo connectors
• 4 foot cable
• Custom transducers available for special applications