污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
溫州聚通閥門有限公司
暫無信息 |
閱讀:670發布時間:2012-06-25
溫州聚通閥門有限公司
11.5KB
120次
WORD 文檔
670次
系列 Series
A38Y-16C/25/40 A43H-16C/25/40 A37H-16C/25/40
本閥門適用于工作溫度≤350℃的蒸汽、水等介質的設備和管路上。作為超壓保護裝置。連接法蘭標準按JB/T……-94的系列1。
This safety valves are used for the equipment and pipeline of the steam, water etc. medium what the working
temperature are less than 350 . Take for extra pressure protection devices.Flange connecting dimensions of comply with Standard series one of JB/T -94.
主要零部件材料 Explanation of materials for main parts
A38Y, A43H, A37H safety valve, except the three-ways style (material WCB), the materials of other parts is the same as A47H, A48Y type spring loaded type safety valve.
A38Y、A43H、A37H型雙聯安全閥是在Y型接頭上裝設兩個同樣規格的A48Y或A47H型安全閥而構成,其公稱通徑系列指Y型接頭進口通徑,其組合情況如下表:
A38Y, A43H, A37H type twin safety valve is composed of two A48Y or A47Y type safety valves with the same specifications. Which are fixed on a Y-shaped joint. The nominal diameter is the inlet diameter of the Y-shaped joint. Here is the table to show its combination.
外形尺寸和連接尺寸 Dimensions (mm)
系列 Series
A38Y-16C/25/40 A43H-16C/25/40 A37H-16C/25/40
本閥門適用于工作溫度≤350℃的蒸汽、水等介質的設備和管路上。作為超壓保護裝置。連接法蘭標準按JB/T……-94的系列1。
This safety valves are used for the equipment and pipeline of the steam, water etc. medium what the working
temperature are less than 350 . Take for extra pressure protection devices.Flange connecting dimensions of comply with Standard series one of JB/T -94.
主要零部件材料 Explanation of materials for main parts
A38Y, A43H, A37H safety valve, except the three-ways style (material WCB), the materials of other parts is the same as A47H, A48Y type spring loaded type safety valve.
A38Y、A43H、A37H型雙聯安全閥是在Y型接頭上裝設兩個同樣規格的A48Y或A47H型安全閥而構成,其公稱通徑系列指Y型接頭進口通徑,其組合情況如下表:
A38Y, A43H, A37H type twin safety valve is composed of two A48Y or A47Y type safety valves with the same specifications. Which are fixed on a Y-shaped joint. The nominal diameter is the inlet diameter of the Y-shaped joint. Here is the table to show its combination.
外形尺寸和連接尺寸 Dimensions (mm)
歡迎訪問 上海方工閥門(集團)有限公司 文章來自: 銷售咨詢:
環保在線 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份