可以進行清洗，但其處理泥污的能力較弱，因此在預處理時應盡可能去除黃泥或泥污。
The ultrasonic cleaner can be used for cleaning, but its ability to treat mud is weak. Therefore, yellow mud or mud should be removed as much as possible during pretreatment.
清洗前，建議用竹刀簡單地清洗零件表面的污垢(如防塵罩外表面有大量灰塵，氣缸體等零件的殼體曲線上有大量厚厚的易清除的油泥堆積)，以延長清洗液的使用壽命。
Before cleaning the ultrasonic cleaner, it is recommended to simply clean the dirt on the surface of the parts with a bamboo knife (for example, there is a lot of dust on the outer surface of the dust cover, and there are a lot of thick oil sludge accumulation on the shell curve of parts such as cylinder block, etc.) to prolong the service life of the cleaning fluid.
1.手動清潔方法是手工完成的？使用金屬刷、刮刀和其他工具清除零件和部件表面的污垢。這種方法還包括用棉、絲、合成纖維、麂皮擦拭零部件表面？去污垢。
1. is manual cleaning done manually? Use metal brushes, scrapers, and other tools to remove dirt from parts and component surfaces. This method also includes wiping the surface of parts with cotton, silk, synthetic fiber and suede? Remove dirt.
2.機械工具清潔方法使用電動或氣動工具驅動金屬刷、軟砂輪等。去除零件和部件表面的積碳、鐵銹和油漆層。
2. cleaning method of mechanical tools use electric or pneumatic tools to drive metal brushes, soft grinding wheels, etc. Remove carbon deposit, rust and paint layer on the surface of parts and components.
3.壓縮空氣吹掃法使用壓縮空氣吹掃干燥的灰塵、污泥等。覆蓋零件和部件的表面。
3. compressed air purging method uses compressed air to purge dry dust, sludge, etc. Covers the surfaces of parts and assemblies.
以上就是為大家介紹的全自動超聲波清洗機有關的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以專業的態度,為您提供服務.
The above is the full-automatic ultrasonic cleaning machine introduced to you I hope that the detailed introduction to the will be helpful to you If you have any questions, please contact us We will provide you with professional service
