1. Automatic conveying chain: made of stainless steel and driven by chain, it moves forward continuously to ensure the stable and accurate operation of the cleaning basket.

2.有兩套噴淋清洗系統，一套采用化學噴淋清洗，兩套采用噴淋漂洗，三套采用噴淋漂洗，四套采用噴淋漂洗，五套采用噴淋防銹，內腔設有帶不銹鋼噴嘴的噴嘴。上下噴淋管的噴嘴布置不當，可以保障被清洗工件的各個方面，無需在清洗區域噴灑淋盲區，從而保障工件清洗的清潔度。

2. There are two sets of spray cleaning systems, one is chemical spray cleaning, two are spray rinsing, three are spray rinsing, four are spray rinsing, five are spray antirust, and the inner cavity is equipped with nozzles with stainless steel nozzles. Improper nozzle arrangement of the upper and lower spray pipes can ensure all aspects of the cleaned workpiece without spraying the blind area in the cleaning area, so as to ensure the cleanliness of workpiece cleaning.

3.除油裝置：在前清洗站處理量大，所以清洗液含油量高。為了防止排水中的油含量過高，該站配備了一個除油系統。

3. Oil removal device: the treatment capacity of the front cleaning station is large, so the oil content of the cleaning fluid is high. In order to prevent excessive oil content in the drainage, the station is equipped with an oil removal system.

4.過濾器循環系統：使清潔劑在過濾罐中循環，以提高清潔效果。使用袋式過濾器。

4. Filter circulation system: circulate the detergent in the filter tank to improve the cleaning effect. Use a bag filter.

5.水切割系統：噴淋清洗機的水切割內腔單獨排入主排水管，進出料外設置隔離段，防止水霧逸出;前后都有可拆卸的檢修窗，便于設備維護和清潔。

5. Water cutting system: the water cutting inner cavity of the spray washer is separately discharged into the main drainage pipe, and an isolation section is set outside the inlet and outlet to prevent water mist from escaping; There are removable access windows at the front and rear to facilitate equipment maintenance and cleaning.

6.抽氣系統：的每個噴霧和切風部分都有一個抽氣孔，在側面與主管相連。主管前端配置有除霧塔內裝拉西環，配備離心風機進行抽氣。

6. exhaust system: each spray and cut wind section has a suction hole connected to the side on the side. The front end of the main pipe is equipped with a demister tower, a Raschig ring is installed in it, and a centrifugal fan is equipped for air extraction.

7.電氣控制系統：獨立控制柜配有PLC可編程控制器、變頻器、接觸器等主要電氣控制元件，由進口的元器件組裝而成，性能穩定可靠，使用壽命長。參見控制電路的電氣控制圖。

7. Electrical control system: the independent control cabinet is equipped with PLC programmable controller, frequency converter, contactor and other main electrical control components, which are assembled from imported components, with stable and reliable performance and long service life. Refer to the electrical control diagram of the control circuit.