愛澤工業2018年4月部分到貨產品專題及庫存

——MR CHEMIE滲透劑、磁懸液、清潔劑篇

如下為我司愛澤工業IZE_Industries本月部分到貨MR CHEMIE相關產品，索取樣本資料和產品信息。

MR CHEMIE清潔劑、顯像劑、磁懸液 愛澤工業izeindustries到貨圖集

德國MR CHEMIE清潔劑MR85產品描述

General appearance and composition:

Mixture of solvents based on alcohol, method C according to EN ISO 3452-1

Dries slowly

Flash point material +13 °C

Suitable for all metals (suitability for plastics needs testing prior to use)

Processing temperature -10 to +50 °C

Aerosol can overhead sprayable

Relevant approvals and specifications

Sample testing acc. to EN ISO 3452-2 and ISO 3452-6

Low content of halogens and sulphur according to EN ISO 3452-2

and ASME Code V, Section V, Article 6

In correspondence with Lloyd's Reg., Bureau Veritas, Det Norske Veritas, admitted

by Framatome ANP

Application:

Remove tinder, rust and other contaminations from surface in a suitable manner.

You can use MR85 Remover as precleaner for removal of oils or fats.Apply MRPenetrant to the part to be tested either by spraying, brushing, flooding

or dipping. Allow to penetrate for at least 5 minutes.Remove excess MRPenetrant from surface using a clean lint-free cloth lightly

moistened with MR85 Remover.Spray MR? Developer (e.g. MR70) from a distance of approx. 20 cm on the dry

surface, achieving a thin, uniform layer. Depending on the used penetrant, surface

defects will appear as red or fluorescent indications. Please note: If the developer

layer is too thick tiny discontinuities will not appear through the developer.

Minimum shelf life:

Will keep for a minimum of 4 years, stored at room temperature

Pack sizes:

Aerosols, 500 ml (1 box contains 12 aerosols)

5 L, 30 L, 200 L

Valve pen (Piccolo-Pen)

MR CHEMIE清潔劑MR85愛澤工業izeindustries發貨照片

愛澤工業(IZE_INDUSTRIESMR CHEMIE)*經銷、常用備件型號：

MR CHEMIE清潔劑MR79

MR CHEMIE清潔劑MR85

MR CHEMIE清潔劑MR88

MR CHEMIE清潔劑MR91

德國MR CHEMIE顯像劑MR70產品描述

General appearance and composition:

Solvent removable developer for red and fluorescent penetrant testingform d and e according to EN ISO 3452-1

Water mixable

Dries quickly

Processing temperature -30 °C to +50 °C

Aerosol overhead sprayable

Relevant approvals and specifications

Sample testing acc. to EN ISO 3452-2 and EN ISO 3452-6

Low content of halogens and sulphur according to EN ISO 3452-2and ASME Code V, Section V, Article 6

In correspondence with Lloyd's Reg., Bureau Veritas, Det Norske Veritas,admitted by Framatome ANP

Produits et Matériaux Utilisables en Centrales (PMUC)

TLV 9017 01:2011-01

Application:

Remove tinder, rust and other contaminations from surface in a suitable manner. A

possible precleaner for removal of oils or fats is e.g. our remover MR? 79.

Apply MR?Penetrant to the part to be tested either by spraying, brushing, flooding

or dipping. Allow to penetrate for at least 5 minutes.

Remove excess MR?Penetrant from surface either using water or a clean lint-free

cloth lightly moistened with an MR? Remover.

Spray MR? 70 Developer from a distance of approx. 20 cm on the dry surface,

achieving a thin, uniform layer. Depending on the used penetrant, surface defects

will appear as red or fluorescent indications. Please note: If the developer layer istoo thick tiny discontinuities will not appear through the developer.

When using a spray gun connected to compressed air it must be ensured that the

supplied air is free of water and fat.

Minimum shelf life:

Will keep for a minimum of 4 years, stored at room temperature

Pack sizes:

Aerosols, 500 ml (1 box contains 12 aerosols)

5 L, 30 L

Valve pen

MR CHEMIE顯像劑MR70愛澤工業izeindustries發貨照片

愛澤工業(IZE_INDUSTRIESMR CHEMIE)*經銷、常用備件型號：

MR CHEMIE顯像劑MR70

MR CHEMIE顯像劑MR81

MR CHEMIE顯像劑MR703W

MR CHEMIE顯像劑MR703WK

MR CHEMIE磁懸液MR76S composition:

Mixture of isoparaffinic carbonhydroxides, additives and pigments

Serves to indicate cracks when performing coloured magnetic particle inspection

Medium particle size da = 1-3 µm

Flashpoint 84°C

Sediment: 0,4 – 0,8 ml/100 ml (1 h)

Low odour

Aerosol cans over head sprayable

MR CHEMIE磁懸液MR76S的組成:

異鏈烷烴碳?xì)浠衔?，添加劑和顏料的混合?/p>

用于在進行彩色磁粉檢查時表示裂紋

中等粒徑：da = 1-3 µm

閃點84°C

沉淀物：0.4?0.8ml / 100ml（1小時）

低氣味

氣溶膠罐頭可噴霧

MR CHEMIE磁懸液MR76S愛澤工業izeindustries發貨照片

愛澤工業(IZE INDUSTRIES)*經銷、常用備件型號：

MR CHEMIE滲透劑MR®67

MR CHEMIE滲透劑MR®67DL

MR CHEMIE滲透劑MR®67PS

MR CHEMIE滲透劑MR®68NF

MR CHEMIE滲透劑MR®68H

MR CHEMIE滲透劑MR®68C

MR CHEMIE滲透劑MR®312

MR CHEMIE滲透劑MR®311-R

MR CHEMIE滲透劑MR®313

MR CHEMIE滲透劑MR®313DL

MR CHEMIE滲透劑MR®699FA

MR CHEMIE滲透劑MR®660

MR CHEMIE滲透劑MR®670F

MR CHEMIE滲透劑MR®671F

MR CHEMIE滲透劑MR®672F

MR CHEMIE滲透劑MR®673F

MR CHEMIE滲透劑MR®70

MR CHEMIE滲透劑MR®70H

MR CHEMIE滲透劑MR®81T-R

MR CHEMIE滲透劑MR®703W

MR CHEMIE滲透劑MR®703WK

MR CHEMIE滲透劑MR®79

MR CHEMIE滲透劑MR®85

MR CHEMIE滲透劑MR®88

MR CHEMIE滲透劑MR®91H

MR CHEMIE滲透劑MR®3001

MR CHEMIE滲透劑MR®3002

MR CHEMIE清潔劑、顯像劑、磁懸液 愛澤工業izeindustries到貨圖集

以上為本月部分到貨MR CHEMIE產品，愛澤工業專業提供MR CHEMIE全系列產品，MR CHEMIE清潔劑MR85，MR CHEMIE顯像劑MR70，MR CHEMIE磁懸液MR76S等等。

如果您有任何關于產品的相關疑問，請隨時與我們，愛澤工業(021-3100 6702)。我們將盡全力解決您的問題。

If you have any question for MR CHEMIE, please feel free to dial or browse our website.