在實驗室的設計中，一個重要的內容就是實驗室的地面，這也是操作者在狹小的實驗空間中的活動范圍。也就是說，雖然它是地面，但它發揮著非常大的作用。在這方面,鑫恒銳實驗廠家強調說,在實驗室的設計,我們必須特別注意這些細節,以確保設計及施工質量,可以讓一個小面積的應用者或操作都的健康提供更方便的作用。
實驗臺設計地面的要求如下：基本上是使用溶劑環氧樹脂、需求強度達到超過甜,當完成時,我們可以通過這樣的標準來衡量，地面是固體，和沒有任何沙地,地面的裂縫發生，不合格，所以我們必須注意。另外，實驗臺設計的地板顏色一般都是艷麗的，而且它還有一個功能，那就是防靜電性能，這對實驗臺來說是非常關鍵的。
實驗臺的設計，除了上面的細節,因為地面也需要耐高溫,對媒介可以攜帶下面的重量,因為實驗臺必須涉及大量設備和設施,重量大,所以我們正在考慮實驗臺設計、地面，不僅僅是執行它的基本功能。而且，更重要的是,它也有裝飾效果，為將來操作員可以減輕工作壓力,作用迅速完成工作。當然，其他基本功能也是必要的，如耐磨、耐洗、必須防滑，以防止操作人員跌倒和受傷。所使用的材料必須質量好、性能好。
In the design of laboratory, an important content is the laboratory site, which is also the scope of the operator's activities in the narrow laboratory space. That is to say, although it is the ground, it plays a very important role. In this regard, Weimeng Raymond stressed that in the design of laboratories, we must pay special attention to these details to ensure that the design is considered to be the quality of construction, which can make the health of a small area of operators or operations more convenient.
The requirements of laboratory design ground are as follows: basically using solvent epoxy resin, the strength of demａnd exceeds sweetness, when completed, we can measure by such a standard that the ground is solid, and there is no sand, the ground cracks occur, not qualified, so we must pay attention to. In addition, the floor color of the laboratory design is generally gorgeous, and it also has a function, that is, anti-static performance, which is very critical for the laboratory.
Lab design, in addition to the above details, because the ground also needs high temperature resistance, the media can carry the following weight, because the laboratory must involve a large number of equipment and facilities, heavy weight, so we are considering laboratory design, ground, not only to perform its basic functions, but also, more importantly, it has decorative effect. In the future, the operator can reduce the pressure of work and complete the work quickly. Of course, other basic functions are also necessary, such as wear resistance, wash resistance and skid resistance, in order to prevent operators from falling and injuries. The materials used must be of good quality and performance.
