污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
湖南迅天科技有限公司
湖南迅天科技有限公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質生產商
所 在 地
聯系方式：易先生查看聯系方式
更新時間：2022-03-16 10:53:26瀏覽次數：443次
聯系我時，請告知來自 環保在線簡單介紹：ZYP-600自動粉末壓片機主要應用于各種粉末的樣品成型使用，可用于，陶瓷，粉末冶金，水泥等行業的產品制樣。
產品特點北京新諾立華儀器有限公司銷售ZYP-600自動粉末壓片機
ZYP-600自動粉末壓片機技術指標：
壓力范圍：3～60噸
工作空間：220×220mm（可定做）
壓頭行程：0～100mm
保壓時間：0～999秒
供電電源：380V/50HZ
額定功率：
外形尺寸：720×530×1180mm
重量：420kg
ZYP-600自動粉末壓片機應用領域
ZYP-600自動粉末壓片機 應用范圍 The scope of application
該儀器主要應用于X熒光分析儀的樣品制樣、可用于陶瓷、粉末冶金、水泥等行業的產品制樣。
The instrument is mainly used in X-ray fluorescence analyzer sample preparation, can be used in ceramics, powder metallurgy, cement and other sectors of the product sample preparation.
整機介紹 Introduction of the Complete Machine
我公司生產的壓樣機是X射線熒光光譜儀的配套設備。ZYP-400KN，ZYP-600KN型壓樣機采用內模壓樣方式，操作方便、效率高、性能穩定可靠。
The sample pressers manufactured by our company are the matching equipment of X-ray Fluorescence Spectrometry. ZYP-400KN and ZYP-600KN Sample Pressers are adopted the methods of internal mould sample-press, with features of easy operation, high efficiency and stable and reliable performance.
產品結構特點 Characteristics of the Products
● 內模式壓樣，壓頭行程100毫米?？捎糜谂鹚?、鋼環、鋁杯、塑環等各類壓樣方式，適用范圍廣，工作穩定。
Adopted internal mould sample-press, pressure head travel is 100 mm. The products can be used for various kinds of sample-pressing methods such as boric acid, steel ring, aluminum cup, plastic ring etc., with characteristics of broad scope of application and stable working.
● *的緩加壓、慢退模程序更有利于保證壓樣合格率、提高壓樣樣品質量。
With specific programs of slow pressurization and slow mould-release, the products are favorable to ensure acceptance rate of sample-press, improve sample quality of sample-press.
● 特別設計的集成液壓管道模塊不僅使組裝更加方便，而且減少了漏油機會。
With integrated hydraulic pipe block being specially designed, it not only makes assembling easier, but also reduces the chance of oil leak.
● 加厚的油箱蓋板使油泵和電磁閥的動作噪音更小。
With thickening oil-tank cover-board, it makes acting noise of oil pump and solenoid valve smaller.
● 采用由可控硅集成的固態模塊替代傳統的接觸器避免了由于電機頻繁啟動而引起的各類故障，有效提高了該部分的使用壽命。
Adopted solid-state block of integrated silicon controlled to replace traditional contactor, it avoids various kinds of troubles caused by frequent starting of motor and efficiently increases service life of this section.
● 繼電器控制部分采用印刷板焊接結構，減少了控制箱的接線，提高了電器控制的可靠性。
The Control section of relay is adopted the welding structure of printed circuit board, it reduces wiring of control box, improves reliability of electric control.
● 控制電源全部采用低壓24V，工作更加安全可靠。
Control power source is fully adopted low-voltage of 24V, which makes work safer and more reliable.
● 結構緊湊，占地面積小。
With compacting structure, small floor space.
技術指標 Indicators| ZYP-400KN | 技術參數 |
| 壓片壓力 | 60T(噸) |
| 模具 | 硼酸、鋼環、鋁杯和塑料環 |
| 壓頭行程 | 100mm |
| 壓片保壓時間 | 0~999 秒 |
| 供電電源 | 380V/50Hz |
| 額定功率 | 1100W |
| 外型尺寸 | 670x510x1180mm |
| 凈重 | 400Kg |
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
