污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
北京北廣精儀儀器設備有限公司
北京北廣精儀儀器設備有限公司
| 參 考 價 | 面議 |
產品型號BC-40A
品 牌
廠商性質其他
所 在 地北京市
聯系方式：查看聯系方式
更新時間：2023-04-19 13:14:33瀏覽次數：263次
聯系我時，請告知來自 環保在線暫無信息 |
總有機碳TOC分析儀
總有機碳TOC分析儀主要特點
1.嚴格按照美國藥典和歐洲藥典等標準，符合中國藥典標準
2.快速、高效、重復性好
3.的VITA技術
4.自動化和智能化
5.可配置總氮測定模塊
6.可配置Swab-test清潔實驗模塊
7.顆粒物兼容性好
8.提供IQ、OQ、PQ
總有機碳TOC分析儀主要特征:
★高精度、高靈敏度，操作簡單。
★人性化操作界面，有一鍵運行功能，自動管路清洗功能。
★高性能CPU，觸摸屏設計，超大640*480點陣真彩顯示器。
★不用拆開機箱更換UV燈和泵管。
★檢測上限可設定，自動上限報警功能。
★具有RS232數據接口，歷史數據可存儲6個月。
★離線檢測和在線檢測可選配。
★具有微型打印機接口（打印機外置）。
產品說明:
總有機碳（TOC）分析儀采用世界的雙波長紫外氧化技術，精度高、靈敏度高。高性能CPU，觸摸屏智能化控制，具有離線分析和在線分析選配功能，配制外置式打印機，人性化的設計理念，更換UV燈和泵管不用拆開機箱，操作簡單、方便，實現了分析儀器國產化。符合《中國藥典》2010版附錄 VIII R制藥用水中總有機碳測定法，滿足藥典對儀器的要求：①TOC=TC-TIC，②系統適用性試驗，③檢測靈敏度（等于或小于0.05mg/L）。
工作原理
樣品中的有機物在紫外線及廣催化的作用下被氧化成二氧化碳，采用電導率檢測技術測定二氧化碳，通過電導率傳感器檢測經氧化反應器氧化后的樣品總碳與電導率傳感器檢測未經氧化反應器氧化的樣品總無機碳之差，獲得樣品中總有機碳含量（TOC=TC-TIC）。
應用范圍
1. 該儀器可用于檢測制藥工業中純化水、注射用水和去離子水中有機碳的濃度；也可用于半導體行業中超純水TOC的檢測。
2. 在制藥領域和生物化學領域清潔驗證過程中，可用于驗證清潔效果。
3. 該儀器具有在線檢測功能，可以在線監測制藥工業的制水系統、半導體工業的超純水制備系統和晶片工藝過程、電廠去離子水制備過程等。
性能規格:
測量范圍：0.001mg/L～1.000 mg/L
精 度：±4% 測試范圍
分 辨 率：0.001mg /L
分析時間：連續分析
響應時間：6分鐘之內
檢測極限：0.001mg /L
樣品溫度：1- 90℃
重復性誤差：≤ 3%
電源要求/功能：220V
顯 示 屏：彩色觸摸屏
產品特點
1.儀器采用便攜設計，使用輕便，方便移動至取樣點。
2.采用嵌入式系統，觸摸屏設計，純中文操作方便簡易。
3.針對制藥用水（TOC含量在1000ppb以下）總有機碳含量的檢測設計，進行檢測。
4.配備大量的儲存空間，能夠存儲大量的測試數據。
5.中文打印，輸出測試參數、測試結果。
6.在使用、貯存和更換過程中不需要氣體或試劑，無移動部件，減少維修和維護成本。
7.當測試樣品濃度超過規定限度，儀器能夠自動報警，并輸出控制信號。
8.符合國家2010版《中國藥典》規定的測試方案，可以提供 IQ/OQ/PQ 服務。
是北京北廣精儀公司自主研發的高精度總有機碳分析儀器。產品使用電導率差值檢測技術，檢測精度高，響應時間短。產品符合國家法規和標準，可滿足制藥用水、注射用水、超純水和去離子水的在線及離線的檢測要求。
工作原理
本儀器采用紫外氧化的原理，將樣品中的有機物氧化為二氧化碳，二氧化碳的測試采用的是直接電導率法，通過測試經過氧化反應的樣品的總碳含量和未經過氧化反應的樣品總無機碳的含量差值來測定總有機碳含量，即：總有機碳（TOC）=總碳（TC）-總無機碳（TIC）。
Total organic carbon analyzer the main characteristics of TOC
1 strictly in accordance with the United States Pharmacopoeia and European Pharmacopoeiaａnd other international standards, meet the standards of Chinese Pharmacopoeia
2 fast, efficient and reproducible
3 the patented VITA Technology
4 automatic and inligent
5 Determination of total nitrogen allocation module
6 configurable Swab-test clean experiment module
7 particles with good compatibility
Provide IQ, OQ, PQ 8
Determination of total organic carbon analyzer the main characteristics of TOC:
* high precision, high sensitivity, simple operation.
* the humanized operation interface, a key operating functions, automatic tube cleaning function.
* high performance CPU, touch screen design, large 640*480 dot matrix color display.
* Don't open the box to replace the UV lamp and the pump.
* the detection limit can be set automatically limit alarm function.
It has a RS232 data interface, the historical data can be stored for 6 months.
* offline detection ａnd online detection of optional.
* with micro printer (printer external).
Total organic carbon analyzer product description TOC:
Total organic carbon (TOC) analyzer using dual wavelength ultraviolet oxidation technology tothe world's leading, high precision, high sensitivity. High performance CPU, touching screeninligent control, with offline analysis ａnd online analysis of the matching function, the preparation of external printer, humanized design idea, replacing the UV lamp and the pump not to open the box, the operation is simple and convenient, realized the localization of instrument analysis. Consistent with the "Pharmacopoeia" 2010 Edition Chinese appendix VIII Rpharmaceutical water total organic carbon determination, meet the Pharmacopoeia requirements of instruments: TOC=TC-TIC, applicability test of the system, the detection sensitivity (equal to or less than 0.05mg/L).
Instrument work principle of determination of total organic carbon TOC
Organic matter in the samples were oxidized to carbon dioxide in ultraviolet light and TiO2 widecatalytic role, determination of carbon dioxide detection by electrical conductivity, conductivity sensor detection through the oxidation reaction of total carbon samples is oxidized ａnd the conductivity sensor detection without difference sample total inorganic carbon oxidation reactor for oxidation, obtain the total organic carbon content of sample in (TOC=TC-TIC).
Total organic carbon analyzer application range TOC
1 the instrument can be used for the purification of water and the concentration of organic carbon in deionized water and injection water detection in the pharmaceutical industry; also can be used for the detection of ultra pure water TOC semiconductor industry.
2 in the pharmaceutical field and the field of bio chemical cleaning validation process, can be used to validate the cleaning effect.
3 the instrument has the function of on-line detection, can produce water system, the semiconductor industry on-line monitoring of pharmaceutical industry in the preparation of ultra pure water system ａnd wafer process, deionized water for power plant preparation process.
Total organic carbon analyzer performance specifications TOC:
Measuring range: 0.001mg/L ~ 1 mg/L
Accuracy: + 4% test range
Resolution: 0.001mg /L
Analysis: analysis of continuous time
Response time: 6 minutes
The detection limit: 0.001mg /L
The sample temperature: 90 C 1-
Repeatability error: less than or equal to 3%
Power requirements / function: 220V
The display screen: color touch screen
Total organic carbon TOC tester product features
The 1 instrument using portable design, easy use, convenient moving to the sampling point.
2 the use of embedded system, touch screen design, convenient operation ａnd simple pure chinese.
3 for pharmaceutical water (TOC content below 1000ppb) detecting design total organic carboncontent, detection.
4 is equipped with a lot of storage space to store a large number of test data.
5 Chinese printing, output test parameters, test results.
6 in use, storage ａnd replacement is not needed in the process of gas or reagent, no moving parts, reduce repair ａnd maintenance costs.
7 when the sample concentration exceeds the specified limit, the instrument can automatically alarm, ａnd output control signal.
8 in line with national 2010 Edition "Chinese Pharmacopoeia" provisions of the test solution, can provide IQ/OQ/PQ service.
Total organic carbon analyzer BC-40a is instrumental analysis Beijing BBEF precision instrumentcompany independent research and development of high precision of total organic carbon.Products using the conductivity difference detection technology, high detection precision, short response time. Products comply with national regulations and standards, testing requirements ofon-line and off-line can meet the pharmaceutical water, water for injection, ultra pure water ａnd deionized water.
Instrument work principle of determination of total organic carbon TOC
The instrument adopts the principle of UV oxidation, the oxidation of organic matter in the samples for carbon dioxide, carbon dioxide is tested by direct conductivity method, total carbon content by testing through oxidation reaction of the sample and the sample without content difference of total inorganic carbon oxidation reaction to the determination of total organic carbon content, namely: total organic carbon (TOC) = total carbon (TC) - Total inorganic carbon(TIC).
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
哈希HQd臺式/便攜式多參數數字化分析儀 TOC分析儀
HQd臺式/便攜式 面議
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
