污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
湖南津市市石油化工儀器有限公司
湖南津市市石油化工儀器有限公司
| 參 考 價 | 面議 |
產品型號JSR0105
品 牌
廠商性質其他
所 在 地
聯系方式：譚總查看聯系方式
更新時間：2025-03-29 09:16:17瀏覽次數：35次
聯系我時，請告知來自 環保在線產品型號：JSR0105產品名稱：全自動汽油氧化安定性測定器(觸摸屏)JSR0105產品說明：JSR0105全自動汽油氧化安定性測定器(誘導期法)一、符合GB/T8018、ASTMD525、ISO7536標準二、主要技術參數：熱浴：金屬浴加熱溫度：100±0
產品型號：JSR0105
產品名稱：全自動汽油氧化安定性測定器(觸摸屏)JSR0105
產品說明：
JSR0105 全自動汽油氧化安定性測定器(誘導期法)
一、符合GB/T8018、ASTM D525、ISO7536標準
二、主要技術參數：
熱 ?。航饘僭?/span>
加熱溫度：100±0.1℃
加熱功率：1.5 kw
氧 彈：符合GB/T8018標準
溫度控制：采用進口溫控器控制
工作單元：二支氧彈
工作電源：AC220V±10％ 50HZ
三、性能及特點：
1、儀器采用單片機控制，在試驗過程中，能自動記錄壓力及其變化過程，并用曲線的方式描繪出來，在試驗完畢后，能自動判別轉折點；
2、試驗過程中，整個充、放氣過程由系統自動完成，所充的壓力可由屏幕顯示的畫面直接反應出來，在充、放氣完畢后，系統能自動判別是否泄漏；
3、在試驗過程中，用戶可根據需要選擇做單個或平行樣，做單個試樣時，可循環試驗，并可在轉折點出來后分別打印結果；
4、儀器可貯存近期內的64個油樣，并以菜單的方式列出時間、操作者編號及油樣編號等項，用戶可根據自己的需求進行查詢；
5、采用金屬浴或油浴，克服了大氣壓給溫度帶來的影響。在試驗完畢后，能自動關閉加熱系統，節約能源；
6、改進了氧彈結構，用球閥代替針閥，減少磨損，提高了閥門的使用壽命；
7、儀器在試驗前或試驗過程中，若溫度不在標準范圍內，將會用聲音報警，提醒用戶此時的溫度狀況；
8、儀器在斷電后再次恢復運行時，可根據屏幕提示按異常中止程序自動恢復，為操作者提供方便，節省時間；
9、在試驗完畢或在查詢過程中，用戶可根據需要打印結果。
JSR0105 automatic gasoline oxidation stability tester (induction period method)
I. Comply with GB/T8018, ASTM D525, ISO7536 standards
Ii. Main Technical parameters:
Hot bath: Metal bath
Heating temperature: 100±0.1℃
Heating power: 1.5KW
Oxygen bomb: conform to GB/T8018 standard
Temperature control: controlled by imported thermostat
Unit of work: two oxygen bombs
Power supply: AC220V± 10% 50HZ
Iii. Performance and Characteristics:
1. The instrument is controlled by single chip microcomputer. In the test process, the pressure and its change process can be automatically recorded and depicted by means of curve, and the turning point can be automatically identified after the test is completed;
2. During the test, the whole process of charging and venting is completed automatically by the system, and the pressure can be directly reflected by the screen. After charging and venting, the system can automatically determine whether there is a leak;
3. During the test, users can choose to make single or parallel samples according to their needs. When making a single sample, cyclic tests can be conducted, and the results can be printed separately after the turning point;
4. The instrument can store 64 oil samples in the near future, and list the time, operator number and oil sample number in the form of menu. Users can inquire according to their own needs;
5. Metal bath or oil bath is adopted to overcome the influence of atmospheric pressure on temperature. After the test, the heating system can be shut down automatically to save energy.
6. The oxygen bomb structure is improved and the ball valve is used to replace the needle valve to reduce wear and improve the service life of the valve;
7. If the temperature of the instrument is not within the standard range before or during the test, it will sound an alarm to remind the user of the temperature condition at this time;
8. When the instrument resumes operation again after power failure, it can be automatically restored according to the screen prompt and according to the abnormal abort procedure, to provide convenience for the operator and save time;
9. After the test or during the query process, the user can print the results as required.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
