污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
科邁斯科技股份有限公司
科邁斯科技股份有限公司
| 參 考 價 | 面議 |
產品型號HT2800T
品 牌
廠商性質其他
所 在 地
聯系方式：查看聯系方式
更新時間：2023-02-23 08:42:11瀏覽次數：249次
聯系我時，請告知來自 環保在線■操作簡單對于常規分析，HT2800T可以一鍵式操作
■ 操作簡單
對于常規分析，HT2800T可以一鍵式操作。在放入樣品后，只需要輸入樣品編號，按下START按鈕。全彩觸控屏幕讓系統操作方便快速、簡單明暸。
■ 5+5
模式之間切換，只需要5分鐘。在不同臺GC之間切換，只需要5分鐘。HT2800T允許在同一個GC工作站上，快速切換不同應用模式。不論您需要頂空、液體進樣、固相微萃取模式，或是需要分流、不分流、on-column進樣，只需要幾分鐘即可開始實驗。
| 項目 | 規格 |
|---|---|
| Dimensions (WxHxD)2 | 330x640x320mm |
| Weight | 10kg |
| Power supply | 100-240±10%Vac; 50-60Hz; 150VA |
| Target illumination | Yes |
| Barcode Reader | optional |
| Tray capacity (Headspace/SPME) | 42 vials (20ml); optional: 6 and 10ml |
| Tray capacity (Liquid) | 121 vials (2ml) |
| Electrical control | LAN and TTL |
| 項目 | 規格 |
|---|---|
| Oven positions | 6 |
| Oven temperature | ambient; 40-170°C |
| Incubation time | 0-999 min |
| Shaking method | orbital |
| Shaker speed | optional |
| Shaking cycles | from very low to very high |
| Tray capacity (Liquid) | on/off 0-9.9min |
| 項目 | 規格 |
|---|---|
| Syringe volume | 2.5ml (standard); optional: 1ml |
| Cleaning system | inert gas flush (inlet: 1/8”; max pressure: 1bar) |
| Vial Leakage Check (技術) | Yes |
| Sampling and injection | |
| Syringe temperature | ambient; 40–150°C |
| Sample volume | steps of 0.01ml |
| Sample homogenization | up to 15 |
| Sample speed | 0.1–100ml/min |
| Other adjustable parameters | injection speed, dwell time between injections, equilibration time, pre/post injection dwell time, enrichments |
| 項目 | 規格 |
|---|---|
| Extraction mode | |
| Fiber type | 10mm, 20mm |
| Fiber cleaning station | |
| Temperature | 210-300°C |
| Cleaning system | inert gas flush (inlet: 1/8”; max pressure: 1 bar) |
| 項目 | 規格 |
|---|---|
| Syringe volume | 0.5, 1, 5, 10, 25, 50 and 100ml |
| SyringeID (技術) | optional |
| Filling | |
| Sample volume | as low as step of 0.1ml |
| Air volume | as low as step of 0.1ml |
| Filling speed | 1-100ml/sec |
| Viscosity delay | 0-15s |
| Bubble elimination | up to 15 pull up strokes |
| Injection | |
| Injection speed | 1-100ml/sec |
| Injection depth | programmable |
| Pre and post inj delay | 0-99s |
| Washing | |
| Type | pre-injection, sample, post-injection |
| Solvent capacity | 6x10ml vials |
| Mode | single or double wash |
| Internal standard technique | |
| IS volume | as low as step of 0.1ml |
| Air gap volume | as low as step of 0.1ml |
| Mode | 1 or 2 air gaps |
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
