特點:
3500機械保護系統的本地或遠程視覺指示
(4)顯示器安裝類型
每3500個機架最多(2)個顯示器

GE / bent利內華達州3500/93系列系統顯示器旨在滿足美國石油協會標準670的要求，并提供位于機架中的所有3500機械保護系統信息的本地或遠程視覺指示，包括:系統事件列表，報警事件列表和所有通道，監視器，繼電器模塊，關鍵相量模塊或測速模塊數據。

3500/93系統顯示通過3500機架配置軟件進行配置。顯示器可以安裝在任何四種方式:面安裝，19英寸EIA機架安裝，面板安裝和獨立安裝。

每個3500機架最多可連接兩個顯示器，每個顯示器需要一個空的3500機架槽位來插入相應的DIM。當顯示器不是正面安裝時，DIM和顯示器之間的電纜連接可以從3500機架的前部或從機架后部的I/O模塊連接。

面板安裝-顯示器安裝在位于同一機柜或距離3500系統100英尺遠的面板開孔中。(當使用外部電源時，距離3500系統高達4000英尺)。
獨立安裝-顯示器安裝在墻壁或面板上，距離3500系統高達100英尺。(當使用外部電源時，距離3500系統高達4000英尺)。
每個3500機架最多可以連接兩個顯示器，每個顯示器需要一個空的3500機架插槽來插入相應的DlM。當顯示器不是正面安裝時，DlM和顯示器之間的電纜連接可以從3500機架的前部或從機架后部的輸入/輸出模塊連接。
需要超過100英尺電纜的應用必須使用外部電源和電纜適配器。使用背光顯示單元的應用必須使用外部電源。有兩個外部電源:一個用于連接到115 Vac和另一個用于連接到230 Vac。
外部電源/端子排安裝套件簡化了外部電源的安裝。該ExtemalPowerTerminal帶狀安裝套件的設計適合于獨立安裝外殼。該套件簡化了外部電源在獨立安裝外殼或用戶提供的外殼中的安裝。

The GE / Bently Nevada 3500/93 Series System Display is designed to meet the requirements of American Petroleum Institute Standard 670 and provide local or remote visual indication of all 3500 Machinery Protection System information residing in the rack including: system event list, alarm event lists and all channel, monitor, relay module, Keyphasor module or Tachometer Module data.

The 3500/93 System Display is configured using 3500 Rack Configuration Software. The display can be mounted in any of four ways: face mounting, 19-inch EIA rack mounting, panel mounting, and independent mounting.

Up to two displays can be connected to each 3500 rack and each display requires one empty 3500 rack slot for insertion of its corresponding DIM. When the display is not face-mounted, the cable connection between the DIM and the Display can be made from the front of the 3500 rack or from the I/O module at the rear of the rack.

Panel Mounting -display is mounted in a panelcutout located in the same cabinet or up to 100feet away from the 3500 System. (Up to 4000 feetaway from the 3500 System when using theExtemal Power Supply).
Independent Mounting -display is mountedflush against a wall or panel and located up to 100feet away from the 3500 System. (Up to 4000 feetaway from the 3500 System when using theExtemal Power Supply).
Up to two displays can be connected to each 3500 rackａnd each display requires one empty 3500 rack slot forinsertion of its corresponding DlM. When the display is notface-mounted, the cable connection between the DlM andthe Display can be made from the front of the 3500 rack orfrom the l/O module at the rear of the rack.
Applications that require a cable longer than 100 feet mustuse the External Power Supply and Cable Adapter.Applications that use the back lighted Display Unit mustuse the External Power Supply. There are two ExternalPower Supplies: one for connection to 115 Vac and theother for connection to 230 Vac.
The External Power/Terminal Strip Mounting Kit easesinstallation of External Power Supplies. The ExtemalPowerTerminal Strip Mounting Kit is designed to fit in theIndependent Mount Housing. The Kit streamlinesinstallation of an External Power Supply in both theindependent Mount Housing or a user supplied housing.