當前位置：廣州市瑞東電子科技有限公司>>光模塊>>100G光模塊>>100Gb QSFP28 ZR4 80Km 1310nm LC Optical Transceiver

100Gb QSFP28 ZR4 80Km 1310nm LC Optical Transceiver

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地廣州市

在線詢價 收藏產品查看聯系電話

聯系方式：查看聯系方式

更新時間：2024-11-20 13:31:12瀏覽次數：76次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  光模塊

3G 視頻光模塊 1080P 60GHZ

12G 視頻光模塊 4K 60GHZ

200G光模塊

100G光模塊

50G光模塊

25G光模塊

10G光模塊

16G光模塊

400G光模塊

40G光模塊

155M-2.5G光模塊

全部產品列表

暫無信息

廣州市瑞東電子科技有限公司

經營模式：其他

商鋪產品：225條

所在地區：

詢價 給他留言

產品簡介

100G QSFP28 ZR4 optical transceiver module, support 100Gb/s and up to 80 km transmission on SM fiber, it works in high-speedIDC connection solutions, and so on.Features4 lanes MUX/DEMUX......

詳細介紹

100G ZR4 80km QSFP28 Transceiver Hot Pluggable, Duplex LC Connector, EML+PIN with SOA Single mode DDM

FIBERWDM’s QSFP28 100G ZR4 RQ-100G-ZR4 is designed for 80km optical communication applications. This module contains 4-lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial inter-face. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector. A block diagram is shown in Figure 1.

Absolute Maximum Ratings

Parameter	Symbol	Min.	Typical	Max.	Unit
StorageTemperature	TS	-40		+85	°C
SupplyVoltage	VCCT, R	-0.5		4	V
RelativeHumidity	RH	0		85	%

Recommended Operating Environment

Parameter	Symbol	Min.	Typical	Max.	Unit
Case operatingTemperature	TC	0		+70	°C
Supply Voltage	VCCT, R	+3.13	3.3	+3.47	V
Supply Current	ICC		1200	1800	mA
Power Dissipation	PD			6.5	W

Electrical Characteristics(TOP = 0 to 70 °C, VCC= 3.13 to 3.47 Volts

Parameter	Symbol	Min	Typ		Max		Unit	Note
Data Rate per Channel		-	25.78125				Gbps
			27.9525
Power Consumption		-	4		6.5		W
Supply Current	Icc		1.2		1.8		A
Control I/O Voltage-High	VIH	2.0			Vcc		V
Control I/O Voltage-Low	VIL	0			0.7		V
Inter-Channel Skew	TSK				35		Ps
RESETL Duration			10				Us
RESETL De-assert time					100		ms
Power On Time					100		ms
Transmitter
Single Ended Output Voltage Tolerance		0.3		Vcc		V		1
Common mode Voltage Tolerance		15				mV
Transmit Input Diff Voltage	VI	150		1200		mV
Transmit Input Diff Impedance	ZIN	85	100	115
Data Dependent Input Jitter	DDJ		0.3			UI
Receiver
Single Ended Output Voltage Tolerance		0.3		4		V
Rx Output Diff Voltage	Vo	370	600	950		mV
Rx Output Rise and Fall Voltage	Tr/Tf			35		ps		1
Total Jitter	TJ		0.3			UI

Note:

1. 20～80%

Optical Parameters(TOP = 0 to 70°C, VCC = 3.0 to 3.6 Volts)

Parameter	Symbol	Min	Typ	Max		Unit		Ref.
Transmitter
Wavelength Assignment	L0	1294.53	1295.56		1296.59		nm
	L1	1299.02	1300.05		1301.09		nm
	L2	1303.54	1304.58		1305.63		nm
	L3	1308.09	1309.14		1310.19		nm
Side-mode Suppression Ratio	SMSR	30	-		-		dB
Total Average Launch Power	PT	8	-		12.5		dBm
Average Launch Power, each Lane		+2	-		6.5		dBm
Difference in Launch Power between any two Lanes (OMA)		-	-		3		dB
Extinction Ratio	ER	6	-		-		dB
Transmitter Eye Mask Definition {X1, X2, X3, Y1, Y2, Y3}		{0.25, 0.4, 0.45, 0.25, 0.28, 0.4}						1
Optical Return Loss Tolerance		-	-		20		dB
Average Launch Power OFF Transmitter, each Lane	Poff				-30		dBm
Relative Intensity Noise	Rin				-130		dB/HZ
Optical return loss tolerance					20		dB
Transmitter reflectance		-	-		12		dB
Receiver
Total Damage Threshold	THd			5.5		dBm		1
Receiver Sensitivity per Lane	R			-28		dBm
Average Power at Receiver Input, each Lane	R	-28		-7		dBm		1
LOS De-Assert	LOSD			-29		dBm
LOS Assert	LOSA	-40				dBm
LOS Hysteresis	LOSH	0.5				dB

Note

1. Sensitivity is specified at BER@5E-5 with FEC

Order information

Product Number	Data Rate(Gb/s)	Wavelength(nm)	Reach(km)	LD	Tx Power(dBm)	PD	Rx Sens(dBm)	Temperature(℃)
RQ-100G-ZR4	100	1310nm	80	LAN WDM EML	2~6	PIN+SOA	<-28	0~70