RDS Taper/cone shape ribbon blender
適用工況條件
錐形螺帶混合機通常應用于粉料、顆粒狀物料、漿料或粘稠體的混合、攪拌、可配備噴液噴淋系統，可按用戶要求設計成真空狀態、帶壓狀態、加熱或冷卻等工藝條件，滿足各種工藝狀況下物料的混合、攪拌。
Applications:
Tpaer ribbon blender widely used for powder, partilce raw material, it can also suit for mixing and stirring slurry, viscous raw material, it can equip the spraying system, it can be designed the vacuum state, under the pressure state, heating or cooling requirements as you requested. It meets requirements for mixing and stirring different kind raw material.
主要功能
◆強力混合作用
使靠近容器壁的物料向上運動而中心處的物料向下運動
◆柔和但地對可流動的物料進行混合,大量的物料可在短時間內實
現混合
◆可以達到高標準的混合均勻
◆幾乎可以將所有的物料排干凈
Main functions:
. Intensive mixing
It can make the raw material to do upward movement which near to the vessel, while the middle raw material do the downward movement.
Soft mixing
It can mixing the flow raw material softt and completely, for large quantity raw material, it can be mixed in short time.
It reach high requirements on mixing uniformity
It can emptying all kind raw material almostly.
特點：
◆懸臂軸結構，軸承端不與物料接觸
◆攪拌槳與容器壁之間間隙非常小，以防止物料粘結
◆標準化的攪拌驅動箱以確保運行穩定、維修成本低
◆針對每個應用采用合適軸密封結構，軸密封離開產品安裝，確保
經過試用和測試的CLARE MIXERS 企業標準攪拌器密封得到很好
的使用
◆符合GMP設備設計--特殊幾何形狀的O形圈，高質量的設備表面
處理和消除死角。
Features:
Cantilever shaft structure, bearing end without contact with the raw material.
There is a lttle space between the agitator blade and vessel to prevent sticking and blocking.
Standard agitator drive box can ensure operation stable and low cost of maintentance.
It adopts the suitable shaft seal structure for each one, when the shaft seal left the package, it can ensure the standard agitator sealing is good after testing the clear mixers.
It meets the GMP requirements-special type-geometrical shape-O type circle, high qualtiy for the surface treatment and clean the dead corner.
可選菜單：
◆可設計成抽真空或帶壓操作
◆可配備冷熱夾層
◆上蓋按用戶要求設計成封頭結構形式
◆密封裝置：標準型填料密封，骨架密封，機械密封
◆出料閥：球閥、蝶閥，閘板閥可供選擇
◆可配置噴液裝置
◆增加切碎裝置，能切碎任何尺寸的聚合物，以滿足工藝要求
Option menu:
. It can be designed the vacuum or pressure operation
. It can equip the cooling or heating jacket.
. Upper cover can be designed head structure as customer request.
. Discharge valve: ball valve, butterfly valve, gate valve etc
. It can equip the spraying device
. It can add chopped device, it can cut up any size of the polymer, it meets the technolgical requirements.
可以滿足工藝條件：
1、滿足GMP和FDA標準
2、滿足真空、正壓、或高溫操作工況，當真空或壓力達到一定程度時并可以保壓一定時間
3、可以真空上料，避免一些輕質細粉人工投料時產生粉塵飛揚
4、可以在物料混合過程中進行加熱或冷卻工藝
5、配置CIP在線旋轉清洗噴淋球，用于設備清洗
Technological conditions
1. It satisfied with the GMP and FDA requirements
2. It meets the vacuum, positive pressure or high temperature condition, when under the vaccum or pressure condition, it can pressurize
3. it can vacuum feeding and advoid some fine powder in the air.
4. It can be heated pr cooled during the process of mixing.
It can equip the CIP Online rotary cleaning spray ball which used for cleaning up the device.
5.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Type | Total volume m3 | Working volume m3 | Power(KW) | Support center distance(mm) | Bearing aperture(mm) | Overall size(D*H)mm | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| RDS-0.5 | 0.5 | 0.3 | 3-4 | 1080 | 30 | 1180*2600 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| RDS-1 | 1 | 0.6 | 5.5-7.5 | 1335 | 30 | 1470*3000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| RDS-2 | 2 | 1.2 | 7.5-11 | 1720 | 30 | 1860*3800 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| RDS-3 | 3 | 1.8 | 11-15 | 1910 | 30 | 2050*4200 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| RDS-4 | 2.5 | 15-18.5 | 15-18.5 | 2110 | 30 | 2250*4350 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| RDS-5 | 53 | 3 | 18.5-22 | 2110 | 30 | 2350*4600 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
