上海奧德污泥脫水機（轉鼓脫水機）技術特點:
污泥濃縮機與污泥脫水機相結合，可節省污泥濃縮池，對各種稀污泥有很強的適應性。
超長的重力濃縮區和擠壓脫水區，處理量大
采用回轉式汽缸清洗技術,清洗能力強,濾布清洗均勻,所需水量少.
大型框架式結構,堅固耐用,易檢修.
采用氣彈簧張緊和調偏，精度高，故障率低。
Technical features:
Thickener sludge and sludge dewatering machine combined savings of sludge thickening tank, the various dilute sludge is a highly adaptive.
Supernatural gravity concentration and the extrusion dehydration, handling a large volume.
Using rotary cylinder washing, cleaning ability, uniform cleaning filter cloth, needed less water.
Large frame structure, durable and easy to repair.
Using gas spring tension and bias, high precision and low failure rate.
污泥脫水機（轉鼓脫水機）工藝流程
1. 重力脫水區：物料進入料箱，經過料箱的折流除砂后均勻的布在重力脫水區的網帶上，依靠重力的作用，脫出介質中的游離水。
2. 楔形脫水區：物料進入楔形脫水區后，經過該段輕微的擠壓脫水，使介質的流動性*喪失，從而保證物料進入回旋脫水區是不會被壓潰，重力脫水區及楔形脫水區的網帶依靠脫水板或?qū)ЬW(wǎng)輥支撐。通過該區段時兩側用封漿器防止?jié){料的流失。
3. 回旋脫水區：該區段主要依靠上下網帶重合，中間夾住介質，通過網帶的張力和網帶繞回輥產生的擠壓力，擠出水分。
4. 壓榨脫水區：該區段采用對輥偏心擠壓的方法，使局部產生高壓，從而提高介質濃度，完成固液分離。加壓方式一般為氣動加壓。
Process:
1.Gravity dehydration areas : materials into a bin after bin of Baffle Desanding uniform after Bush gravity dehydration in the net belt Gravity on the role of the media stepped out free water.
2.Wedge dehydration areas : materials into wedge dehydration zone, after the extrusion of minor dehydration, enable media completely lost, thereby ensuring materials into the roundabout dehydration District will not be crushed, Gravity dehydration and dehydration wedge with the network rely on the board or dehydration I. Roll network support. Through the zone when both sides used to prevent the closure pulp slurry for the loss.
3.Roundabout dehydration District : The next section on the main network with coincidence, in the middle clamping medium, through the net with the tension bａnd around the net and roll back the extrusion pressure, extrusion water.
4.Dewaterer areas : the use of Section roll extrusion eccentric ways in which local produce high pressure, thereby increasing media concentration complete solid-liquid separation. Pressure normally for pneumatic compression.
污泥脫水機*
1. 機架：采用上等碳素鋼板折彎成形及焊接。表面采用*的防腐技術處理，*后涂裝，既防腐又美觀。
2. 輥體：以厚壁鋼管為主體采用烘裝工藝制成毛坯輥，輥體外圓、端面、軸頭全部掛耐腐蝕膠，而且在靠近軸承的部位設有防水臺。以保護軸承。對被處理介質有特殊有求的輥體，采用不銹鋼包覆或NIP合金鍍層處理。
3. 脫水板：采用高分子PEA板中間鉆孔，該脫水板具有硬度高，耐磨性好，耐腐蝕和聚酯網之間的摩擦小等優點，主要安裝在重力脫水區和楔形脫水區。
4. 封漿裝置：采用聚氨酯材料制成，既具有一定的彈性又有一定的耐磨性，安裝在楔形脫水區以防止?jié){料流失。
Quality Assurance
1.Rack : Bending quality carbon steel forming and welding. Surface application of advanced anti-corrosion technology, with the final painting, both preservation and aesthetically pleasing.
2.Roller : A thick-walled pipe for the main process equipment used scones made from rough roller, roller vitro round face, the first axis linking corrosion resistant plastic. Bearing in close to the site with waterproof Taiwan. To protect bearings. To be treated with special media have requested the body roll, use stainless steel or coated alloy coating treatment NIP.
3.Dehydration plate : PEA board polymer intermediate drilling, the dewatering plate with high hardness and good wear resistance. corrosion resistant polyester net and friction between the small advantages, such as the installation of the gravity main dehydration dehydration and the wedge area.
4.Pulp closure devices : polyurethane material, we have a certain degree of flexibility is definitely the wear resistance, Wedge dehydration installed in the area to prevent the loss of slurry.
標準配備 Standerd Equip: 選配 Select Matching
主機體 Mainframe 污泥輸送泵 Sludge feeding pump
轉鼓濃縮系統 Drum-concentrate system 絮凝系統 Flocculate system
電控箱 Electrical-control box 清洗泵 Fleanout pump
空氣壓縮機 Air compressor 污泥輸送裝置 Sludge feeding device
應用行業：
1.適用于大型市政污水,大型工廠及冶煉廠以及對污泥含水率有嚴格要求的項目,如冶金工業,鋼鐵工業,自來水廠,氣體脫硫。
2.適用于污泥量大，進泥濃度低的項目，如造紙、化纖、制糖、釀造等行業。包括未進行污泥濃縮的市政污水。
Application Industries :
1.Apply to the large municipal sewage, large factories and smelters and the moisture content of the sludge, there are strict requirements for the project, If metallurgical industry, the steel industry, water works, gas desulfurization.
2.Apply to the large volume of sludge, the sludge into a low concentration of items such as paper, fiber, sugar, and brewing industries. Not include sludge thickening for the municipal wastewater.
工程實例：
本公司供應中國鎳都—金昌的DY-2500型脫水機
The press we offer the Jin Chang province
機型：DY-2500，進泥含水率98%，泥餅含水率79%，處理量900kg.ds/hr
污泥脫水機技術參數：
Technique parameter:
機型Type | 帶寬 Bandwidth | 產量 output | 進料濃度 Feed concentration | 出料濃度 Discharging concentration | 外形尺寸 Dimensions 長X寬X高 | 配用動力 (KW) | 重量 (kg) |
DY-1000 | 1000 | 150-470 | ≥2% | 20-25% | 5590×2717×2562 | 7.5 | 3600 |
DY-1500 | 1500 | 250-600 | ≥2% | 20-25% | 5590×3717×2562 | 7.5 | 5900 |
DY-1800 | 1800 | 460-900 | ≥2% | 20-25% | 5590×3920×2562 | 10 | 8100 |
DY-2000 | 2000 | 530-1000 | ≥2% | 20-35% | 7300×3950×3047 | 18.5 | 10800 |
DY-2500 | 2500 | 640-1100 | ≥2% | 20-35% | 7300×4590×3047 | 22 | 12600 |
DY-3000 | 3000 | 720-1300 | ≥2% | 20-35% | 7300×4950×3047 | 37 | 15000 |
備注:
處理量及泥餅含水率因行業的不同略有差異.（參見樣本第1頁，典型物料脫水的性能參數）
Remark:
Processing Capacity and moisture percentage would have few difference in different industry.
以上機型，本公司標準材質為碳鋼防腐
以上圖紙資料，本公司有電子版本，歡迎索取
以上安裝技術，無須預埋件及地腳螺栓
機型尺寸變更時，恕不另行通知
Above models, the company standards for carbon steel materials
Preservation drawings above information, the Company is the electronic version, Welcome for the installation of more technology,
Not embedded parts and bolts
Type size change, do not inform any more.
