當前位置：上海岑途日斯工貿有限公司>>>>CM系列執行機構

CM系列執行機構

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地

在線詢價收藏產品查看聯系電話

聯系方式：查看聯系方式

更新時間：2023-09-05 08:03:47瀏覽次數：205次

聯系我時，請告知來自環保在線

產品分類 品牌分類

暫無信息

上海岑途日斯工貿有限公司

經營模式：其他

商鋪產品：7條

所在地區：

詢價 給他留言

產品簡介

CMV-ControldrivelargeenclosedactuatorCMVactuatorisabletocontrolfinalelementsofmodernpowerstations(dampers,hydraulicconverters,etc

詳細介紹

CMV - Control drive large enclosed actuator

CMV actuator is able to control final elements of modern power stations (dampers, hydraulic converters, etc.) using high power actuators to develop torque up to 20.000 Nm.
In this series, the housing provides a double function of protection and bearing frame. This system assures maximum stiffness without making use of additional supporting structures. Consequently, the whole volume inside the housing is available for the most rational installation of the actuator and the various accessories.
The possibility of inspection is assured by means of large removable panels. The actuator used is the cylinder type SC which is equipped with the life time lubrication system patented by STI and the cam positioner type SA/CL-1 available in sizes from ?" to ?" according to the requested response speed. On-off actuators are also available on request.
The CMV actuator may be supplied in eight different sizes in order to comply with a large range of torques.
The shaft equipped with an external lever has an operating angle of 70° and is fitted, at its two terminals, with a splined joint which allows the most convenient orientation of the control lever.
The manual control is provided with a handwheel.

Control signal: standard 3 / 15 Psig

Housing: carbon steel

Lever operating angle: 70°

Max. operating pressure: 100 Psig (689 kPa)

Operating temperature: -20°C to +80°C

Standard painting: epoxydic

Supply: dry instrument air 35/100 Psig