當前位置：北京杰斯曼科技有限公司>>氣體檢測儀>>美國 ATI C16便攜式氣體檢測儀、多種氣體檢測儀

美國 ATI C16便攜式氣體檢測儀、多種氣體檢測儀

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號C16

品牌

廠商性質其他

所在地

在線詢價收藏產品查看聯系電話

聯系方式：高經理查看聯系方式

更新時間：2022-10-21 15:46:26瀏覽次數：173次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  氣體檢測儀

全部產品列表

暫無信息

北京杰斯曼科技有限公司

經營模式：其他

商鋪產品：173條

所在地區：

聯系人：高經理

詢價 給他留言

產品簡介

美國 ATI C16便攜式氣體檢測儀、多種氣體檢測儀

詳細介紹

C16便攜式氣體檢測儀

產品名稱：C16便攜式氣體檢測儀

C16便攜式氣體檢測儀

Cl6手持式氣體檢測儀能在現場檢測環境空氣中的有毒有害氣體，可用于應急監測、職業衛生場所有毒有害氣體檢測、石化企業安全檢測以及儲運、泄露檢測等。

該儀器*出色的特點是它能通過更換相應傳感器模塊檢測多種類型的氣體。即不需為每種類型的氣體分別購買單獨的主機，一臺檢測儀與不同的傳感器結合使用，就能檢測超過3 0種不同的氣體，傳感器可以即插即用，不需再次校準。檢測量程可在*大量程和*小量程范圍之間任意可調，可以根據檢測的需要自由設置量程。

主要特點

可檢測多達3 0種有毒有害氣體

即插即用，無需標定

檢測量程可根據檢測需要調整

內置采樣泵、外置采樣桿

高容量數據采集

RS一2 3 2輸出接口

檢測器幾乎可在任何地方使用

美國 ATI C16便攜式氣體檢測儀、多種氣體檢測儀

One Gas Detector for Many Gases...

Click Here to Download the Datalog Software for Win7 32/64 Bit

ATI's Series C16 PortaSens II Portable Gas Leak Detector is a versatile tool for performing regular leak checks in gas storage areas, around process equipment and piping, or in confined spaces prior to entry. Designed for easy one-hａnd operation, the gas detector contains an internal sample pump and a flexible sampling wａnd to allow pinpoint location of the source of leakage. A large character display insures that measured values are easily visible, and a back-light for the display insures readability in low or no light conditions.

A unique feature of the C16 gas detector is its ability to measure a variety of different gases by simply inserting the appropriate sensor for that gas. That makes this gas detector capable of measuring over 30 different gases or vapors, reducing the need to purchase individual detectors for each type of gas. The gas sensors for the detector can be changed quickly and easily, and there is no need for calibration when a gas sensor is change is made.

Gas sensors used in the C16 portable gas detector are ATI’s newest miniaturized smart sensor modules. Each sensor module is actually a sensor, amplifier, and memory module in one compact package. Because of this design, sensor modules can be calibrated independently and simply plugged into any detector for immediate use. When installed in a gas detector, calibration data is loaded into the microprocessor so that no adjustments are needed. The result is that a gas detector can, for example, go from phosgene measurement to ammonia measurement in less than one minute.

The C16 PortaSens II is equipped with an RS-232 output which allows stored data to be downloaded to a PC through an interface cable that is supplied with the unit. A software package is included with the unit to facilitate data transfer.