FC-WII機型特點：1復卷控制：全自動氣動比例閥控制芯軸夾持裝置提升，氣壓伺服系統控制騎輥壓力，氣動頂針夾持芯軸；2分切下刀刀組：整體式刀軸，套滿多刃刀套/可移動兩刃刀套；可選底刀快速更換功能；3前后復卷輥差速+騎輥控制成品密度及盤端整齊度；4后架：有軸式/無軸式，下壓式/底托式/側壓式，可選正反轉功能，方便操作，獨立驅動導輥和托紙輥，無需托紙平臺，減少伸長率損失；5的壓光技術：高硬合金鋼鍍......

詳細介紹

商品名稱: FC-WII高速分切機
商品編號: FC-WII

FC-WII機型特點： 1·復卷控制：全自動氣動比例閥控制芯軸夾持裝置提升，氣壓伺服系統控制騎輥壓力，氣動頂針夾持芯軸； 2分切下刀刀組：整體式刀軸，套滿多刃刀套/可移動兩刃刀套；可選底刀快速更換功能； 3·前后復卷輥差速+騎輥控制成品密度及盤端整齊度； 4后架：有軸式/無軸式，下壓式/底托式/側壓式，可選正反轉功能，方便操作，獨立驅動導輥和托紙輥，無需托紙平臺，減少伸長率損失； 5·的壓光技術：高硬合金鋼鍍硬鉻拋光壓光棍，分單電機和雙電機驅動兩條壓光棍，采用氣胎加壓方式，契形墊塊微調間隙，可調整兩輥交叉角度補償中高； 6.配翻斗作運行保護； 7.自動落芯軸功能； 8.氣動比例閥（機型：2950）；液壓伺服閥控制騎輥（機型：3750/4030）； 9.可選自動插拔軸系統，方便操作，提高效率； 10.標配輔助散紙輥。 Features of FC-WII models: 1. Rewinding control: The fully automatic pneumatic proportional valve controls the lifting of the spindle clamping device, the pneumatic servo system controls the roller pressure, and the pneumatic ejector pin clamps the spindle; 2-part cutting blade set: integral blade shaft, fully covered with multi blade blade sleeve/movable two blade blade sleeve; Optional bottom knife quick replacement function; 3. Front and rear rewinding roller differential speed+ride roller control for finished product density and disc end uniformity; 4. Rear frame: axial/non axial, downward pressure/bottom support/side pressure, with optional forward and reverse functions for easy operation. It independently drives the guide roller and paper support roller, without the need for a paper support platform, reducing elongation loss; 5. Leading calendering technology: High hardness alloy steel plated with hard chromium polishing calendering rod, divided into single motor and dual motor drive two calendering rods, using pneumatic tire pressure method, wedge shaped cushion block fine adjustment gap, adjustable cross angle between two rollers to compensate for medium high; 6. Equipped with a flip bucket for operation protection; 7. Automatic core dropping function; 8. Pneumatic proportional valve (model: 2950); Hydraulic servo valve control roller (model: 3750/4030); 9. Optional automatic shaft insertion and extraction system for easy operation and improved efficiency; 10. Standard auxiliary loose paper roller.

機型	FC-V 2950/3750/4030
原紙寬度	2860/3660/4210mm，其他請注明
生產擔保速度	0-1000米/分鐘
原紙外徑	3000mm/其他尺寸請注明
最小分切寬度	50-200mm，（小于200mm推薦使用液壓中高弧形輥）