污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
慧創（北京）儀器設備有限公司
慧創（北京）儀器設備有限公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地
聯系方式：查看聯系方式
更新時間：2022-10-27 17:11:19瀏覽次數：282次
聯系我時，請告知來自 環保在線AlemnisNanoIndenter納米壓痕儀Alemnis公司的NanoIndenter納米壓痕儀是一款結構緊湊，功能多樣的儀器，可與眾多測試和成像設備集成，并可用于多種不同的應用場景
Alemnis公司的NanoIndenter納米壓痕儀是一款結構緊湊，功能多樣的儀器，可與眾多測試和成像設備集成，并可用于多種不同的應用場景。適用于掃描電子顯微鏡（SEM）的原位測量，也可用于同步輻射裝置和光學顯微鏡的常規環境中使用。
這款原位納米壓痕儀是可以真正提供形變控制模式的儀器，可為許多材料測試和各種應用領域提供的靈活性、準確性和真正的原位納米機械性能測試。
Alemnis的納米壓痕儀可經過改裝，升級模塊后，可在高剪切應變下進行動態機械性能測試，并可在超高溫條件下進行測試。
The Idea of Nanoindentation
In Nanoindentation, a sample is indented with a small diamond tip (tip radius some nm).
In situ Nanoindentation can give more information on the formation and propagation of mechanically induced dislocations and defects during the experiment.
The In Situ Nanoindenters are compact, robust, versatile and can be fitted to various kinds of microscopes such as Scanning Electron Microscopes (SEM), light microscopes, Synchrotron beamlines, and many more. The idea of nanoindentation arose from the realization that an indentation test is an excellent way to measure very small volumes of materials.
Experimental Aspects
? Successfully address metrology challenges like Mechanical Strength (Elastic Modulus, Hardness, Fracture), Interfacial Adhesion and Failure
? Characterization of microstructural changes with sub-nanometer resolution in an in-situ vacuum environment
? Characterizing the mechanical properties of surfaces or structures IN-SEM and IN-AIR
? Characterization of organic, inorganic, soft or hard materials and coatings
? Nanomechanical characterization with direct observation
Understanding material behavior at the micro-ａnd nano-scale
? Compact and robust design in a stand-alone instrument that is easy to install and remove and which can operate in any position(horizontal, vertical or tilted).
System Specifications
? Primary indentation mode: True displacement
? Customizable software
? Standalone instrument, operating in SEM or in ambient
? Maximum indentation load: 0.5 N (standard) and 2.5 N (optional)
? Indentation load RMS noise: 4 μN* (0.5 N range) and 20 μN* (2.5 N range)
? Maximum indentation depth: 40 μm
? Indentation depth RMS noise: 1 nm*
? XY closed loop sample micro-positioning system with 26 mm range
? Z closed loop indenter tip micro-positioning system with 22 mm range
? XYZ micro-positioning system resolution: 1.2 nm
? Maximum recommended test area: 10 x 10 mm
? Heating/Cooling Options: -120°C up to 1000°C
? Strain Rate Options: controlled strain rate up to 10’000 s-1
? Weight: ~ 500 g
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
